Bosch Motor Light Ports

[bmag]

Hi all,
I own a Cube Reaction Hybrid with a Gen 3 Bosch Performance Line motor. I bought a front and rear light to integrate into the electrical system.
I disassembled the motor housing and found the 2 light ports. The problem is both light ports on the bike look identical while the connectors on the lights themselves are slightly different - the front light is connected to the blue connector and the back light to the black connector.
I'm just wondering whether I'm missing something on the bike (it's very difficult to get a good view of the ports on the bike). Are there in fact different ports or is there a wiring schematic to be found for the Bosch motors.
I realise I'll have to call into my dealer to get the lights activated.
Thanks for your help

 

[soundwave]

the connectors are keyed so you cant fit them in the wrong port blue front and black rear.

 

[bmag]

Thanks for the info! - just wondering if you had the 2021 Gen 3 Performance Line Electrical Diagram? The one above is for the Performance Line CX

 

[soundwave]

both motors are the same but you wont be able to plug the front light in to the rear light as the connectors are keyed for each socket front and rear.

id just fit them and let the dealer connect them to the motor when they turn on the light function.

 

[Crowesnest]

Hi there , I also have the same cube bike and wanted to know which lights you purchased? Thanks .