D
Deleted member 4366
Guest
Jeez, you're hard work. You gave us the dimensions in your photo above. You need to confirm the question marks.Where did u find these measurements
Jeez, you're hard work. You gave us the dimensions in your photo above. You need to confirm the question marks.Where did u find these measurements
Jeez, you're hard work. You gave us the dimensions in your photo above. You need to confirm the question marks.
sorry about that i should have measured more better anyway here is the width between those 2 pillarsThere's two pillars half way down your battery box. They restrict the width of a long pack, so we need the distance of the gap between them. We also need the depth of the box.
Hi yes of course I will remove that middle piece of plastic as knew that anyway. But obviously have not done so yet as still using old batteries. But once new lithium one arrives in will.Billy
The plastic fillet reduces the space inside the box.
You appear to have two spaces 150*110*100as near as.
Cutting the fillet out makes it
300*100*100 ish
I hope you remember where the black and red wires connect to the output/rest of bike.
yes thats correct 320*80*115You can break off that plastic web between the pillars if you want. That would leave a space 320 x 80 x 115,so this one should fit:
http://www.aliexpress.com/item/Electric-Bicycle-Battery-24v-16Ah-350W-Lithium-ion-Battery-Pack-24v-for-eBike-24v-with-15A/32679517104.html?spm=2114.30010308.3.379.M8cD9s&ws_ab_test=searchweb201556_0,searchweb201602_3_10057_10056_10065_10037_10055_10054_10069_301_10059_10033_10058_10032_10017_10071_10070_10060_10061_10052_10062_10053_10050_10051,searchweb201603_2&btsid=f5cfdbb4-b453-47c5-bd4f-fe3b13752bd0
ok so that battery you posted link to will fit then ok, as i just assumed. when it says L W T meant length width and dept as just thought 220 length is ok same as depth 70 but didnt know 220*95*70 is same as L 220mm W 95mm and T 70mm can be as 220*70*95220 x 90 x 70 is the same as 220 x 70 x90!
Whatever battery you get, you'll have to solder some wires. You can either cut off whatever connector is on the cell-pack and join the wires or get hold of the matching connector and solder it to the wires in your case. The small red one is a Deans connecor that you can get from Ebay for next to nothing.