I agree with that comment completely, but I add to it, but some here still have not learned the basics of electricity yet!!
Furthermore, you make unfounded assertions (apparently believable enough that some here may like - wrongly of course!) with nothing to back them up!
We are to take you at your word on that? Why?
I myself prefer to back up my comments when needed, with valid sources and links, and I had somehow guessed that you might "jump" in again in an unfriendly manner to several good Pedelec members, including myself!
So have a good read here, as it will show that what you, someone CLAIMING to be a a bike shop repairer if I remember correctly, are using some wrong data,particularly with regard to Li-ion batteries, just to try and win something?
Its not a competition! But true and accurate FACTS are needed for us all,
You can of course read the original text on the links, which I have placed here completely unaltered, ecept with some underlining:-
Ebike charging for long Battery life So, you want your battery to last a long time?…remember that most people will not ride their ebike 500 times in their lifetime. Maybe hard to believe, but…
www.electricbike.com
Where the author posts:-
Do not store your lithium batteries either fully charged or fully discharged….but somewhere in the middle. If you have a smart charger, we recommend you charge to 80 percent and store there.
If you are storing for a long period of time (like the several months of winter), charge it to around 50 percent and keep it in a fire-safe place.
If you have to choose between storing your batteries empty or full…choose full to keep the battery from drifting down to a level that it cannot be safely charged.
The BMS will shut down and you can ruin your battery if the battery drops below the low voltage cut off. The BMS is the battery management system that keeps your battery from overcharging or undercharging and monitors the safety and health of your pack.
Or here which posts basically the same values, plus even more details with regard to good care and maintenance:-
When batteries are made at the factory the cells are spot welded into parallel groups and series. A battery management System is then soldered to each parallel group. For example a 52 volt 11.5ah or 13.5ah Shark pack will have 56 cells and the packs is called a 14s 4p. When charging the...
electricbike.com
Where the Author posts this and a whole lot more:-
READ BEFORE USE
IMPORTANT: NEVER LEAVE THE BATTERY CHARGING UNATTENDED OR OVERNIGHT WHILE SLEEPING! Li-ion is safe to use but like any energy storage device there are some risks associated. If you would like to know more safety concerns with Li-ion click here
VERY VERY IMPORTANT: Never charge your battery from the discharge port (or more than a few seconds if it's just to jump start it), charging like this will bypass the BMS protections and can be dangerous if you have an issue in the battery.
JUST IMPORTANT BUT NOT CRITICALLY : The battery needs to be charged prior to the first ride. The packs are shipped with 30-50% state of charge only! Always plug the charger in the AC outlet before connecting the charger to the battery.
I myself really like the infos supplied here for safe usage with batteries, particularly Li-ion:-
Review simple guidelines for charging Lithium-based batteries and prolong battery life such as; a portable device should be turned off while charging and more.
batteryuniversity.com
The author(s) mention this, which I find to be really good and accurate, and is FAR lower voltage level than the storage charge you yourself recommend.
It is also the charge level I recommended!!! Funny that!!
See underlined wording:-
Simple Guidelines for Charging Lithium-based Batteries
- Turn off the device or disconnect the load on charge to allow the current to drop unhindered during saturation. A parasitic load confuses the charger.
- Charge at a moderate temperature. Do not charge at freezing temperature. (See BU-410: Charging at High and Low Temperatures)
- Lithium-ion does not need to be fully charged; a partial charge is better.
- Not all chargers apply a full topping charge and the battery may not be fully charged when the “ready” signal appears; a 100 percent charge on a fuel gauge may be a lie.
- Discontinue using charger and/or battery if the battery gets excessively warm.
- Apply some charge to an empty battery before storing (40–50 percent SoC is ideal). (See BU-702: How to Store Batteries.)
You get the picture.. it is all important stuff, if you wish to get the most life out of your battery and avoid certain issues.
I trust that you are neutral enough to actually learn something from these web links from highly respected sources! They all agree with each other, but not with you!!
I can be a good friend to reasonably friendly people, but I also can be sarcastic to people that just get rude for no intelligent reason, and who also (as in this case) post incorrect information, that some newbies/amateurs here might pick up on, to the detriment of their pockets and their hobby!!!
Please, in the future, at LEAST post supporting links with your comments, of course ones pertaining to your comments....as that will help you personally and the Pedelec Forum generally.
I wish you a great day!
Andy