For Sale Bafang rear hub motor kit 250w, 48v 17.5ah battery - UK Road Legal. 26” Wheel.

[NikkJ]

Bafang 250w motor kit - UK legal

Large capacity 48v battery 17.5Ah - 12 INR 18/65-5. Model BT C01.750.UC

Battery power - 750Wh

250w Motor already laced in a 26inch rear wheel

Battery rack carrier with integrated controller housing

Display and cables included

keys for the battery

Battery charger included

This kit is great for converting any bike into a UK-legal e-bike for a first-timer.

BB torque/speed sensor is not included in this kit

£250 ono

 

[Baz the balloon man]

Hi Nikki is this kit new or used

is it all Bafang Brand including the battery ?

is the rear wheel Cassette ?

Sorry I can not see the photos to well and when I enlarge them they go blurry.

could you e mail me the pictures to bazautos@gmail.com

I am interested in the kit for my Giant Anthem X full Suspension bike so may need advise on which bottom bracket or PAS will work if we buy the kit .

Any of my bits on here you would want to PX for ?

Cheers

Baz

 

[NikkJ]

Hi Baz

The kit is of a trike; I think the whole system is about a year old. So used, but very limited miles on the motor and battery
The rear wheel is a cassette
It's a full Bafang system, yes, including the battery.
Nothing for PX. Just want rid of the system a a whole.
The Bafang BB cadence/speed sensor will be fine for the bike; obviously, it depends on the size of your Bike BB.
I will see if I can get some new photos for you
Rgds
Nic

 

[Baz the balloon man]

Thanks I am interested just need to sell some of my bits to pay for it .

my wife wants to fit it on this see attached .

what do you think for a fit ?

 

[Baz the balloon man]

Where are you based ?
I am in London NW2

 

[NikkJ]

It will run on any 26-inch bike, to be honest.
Just need to get the correct cable out of the BB sensor
Hereford

 

[Baz the balloon man]

Hi Nikkj

I have built a few bikes now not concerned with making the e spec work.

As its a full suspension bike it’s the fitting of the other none e components that I have concerns about .

And not being able to put the bike back to original condition.

Do you mind if I post my plans on here and get some opinions as to any potential problems I may encounter?

As it’s for my wife I just want to make sure it’s a 250W motor not a bigger one with stickers on it .

If it was for me I would not worry about it this is what I use on my 350W motor but for her it has to be by the book.

I could do with better photos e mailed pls.

Cheers

Baz

 

[NikkJ]

Hi Baz

Put up your plans, and I will take a look. You can always turn the bike back to its original state. You don't need to cut or manufacture parts to fit. It's a kit; just connect it up and power up, and that's it.
It's a 100% legal 250w motor; the battery has more capacity as this kit was removed from a disabled trike system. So, there are no stickers involved. It is the controller that controls the power anyway, not the motor.
Regards
Nic

 

[Baz the balloon man]

Thanks Nick

 

[Baz the balloon man]

Nikki

Sorry we will not be buying the kit at present.

I bought a Giant recently from a charity now they have just agreed to give me the battery and charger so no budget at the moment until I sell it.

good luck with your sale .

cheers
Baz

 

[Chris.mitu]

Hi, would it work with a torque sensor?
What is the motor model?
Can it fit disk brakes?
Apologies if the informationnis in the photos but they are fairly low resolution and can't tell.
Would you consider posting the kit?
Thanks

 

[Peter.Bridge]

Hi, would it work with a torque sensor?
What is the motor model?
Can it fit disk brakes?
Apologies if the informationnis in the photos but they are fairly low resolution and can't tell.
Would you consider posting the kit?
Thanks

I think you need a matching torque sensor, controller and display (I had one from Woosh) that has a connection to the motor from the controller

 

[NikkJ]

Hi, would it work with a torque sensor?
What is the motor model?
Can it fit disk brakes?
Apologies if the informationnis in the photos but they are fairly low resolution and can't tell.
Would you consider posting the kit?
Thanks

Hi Chris

You will need a Bafang PAS or something similar to run the motor. It comes with a display. I will get some better images and upload for you. I would need to find out cost for shipping as its pretty large and heavy

 

[NikkJ]

Hi Chris

You will need a Bafang PAS or something similar to run the motor. It comes with a display. I will get some better images and upload for you. I would need to find out cost for shipping as its pretty large and heavy

 

[NikkJ]

Chris PSA

 

[NikkJ]

Hi, would it work with a torque sensor?
What is the motor model?
Can it fit disk brakes?
Apologies if the informationnis in the photos but they are fairly low resolution and can't tell.
Would you consider posting the kit?
Thanks

Yes Chris, you can attach a disc rotor