Bafang BBS01 broken ring

[10JP]

Hi, does anyone know where to get spare parts for the Bafang BBS01
What appears to be a magnetic sensor ring has broken on the drive.... see pics.

 

[LeighPing]

Perhaps send a message, with your pics, to these people.

http://www.greenbikekit.com/accessories/bafang-8fun-spare-parts.html?p=4

 

[10JP]

Thanks, will do

 

[Fordulike]

Crikey, loads of rust on the final drive. Do you ride yours in the rain or through deep water?

 

[10JP]

Yes there was a fair bit of very tacky rusty grease, its all cleaned up well apart from the sensor ring! have covered about 1500 miles, must avoid the puddles!

 

[10JP]

Crikey, loads of rust on the final drive. Do you ride yours in the rain or through deep water?

A muddy session!

 

[gkspud]

is it just plastic with embedded magnets? id prob just glue it in place/together with some impact adhesive, not sure if jb weld would do as contains metal.

a zip tie around the outside may work if theres enough room

 

[10JP]

is it just plastic with embedded magnets? id prob just glue it in place/together with some impact adhesive, not sure if jb weld would do as contains metal.

a zip tie around the outside may work if theres enough room

Think thats where I am with it at the moment will probably look at a 2 part adhesive like Araldite, have found out what the sensor does, its for the pedal assist to tell the direction and speed of the crank.