ok, just received a badass box for my mates scott e silence. problem is the box just grazes the spokes. has anyone else come across this problem before?
Badass woes
- Thread starter Anthonyexmouth
- Start date
i looked at that but unlike my giant where the allen bolt screws into the the chain stay on the scott there is a bracket it screws into that runs parallel to the stay.
I installed one onto my bike last week (scott e-silence 10) and it fits fine. There isn't much clearance between the magnet on the spoke and the badass box, but it fits without touching anything.
It works a treat too. I love riding my bike even more now - 40km/h on the flat stuff with little effort required, or 50-55km/h if i put some effort in
It works a treat too. I love riding my bike even more now - 40km/h on the flat stuff with little effort required, or 50-55km/h if i put some effort in
in the end i put a few washers between the speed sensor and the mounting bracket to bring it back a few mm. i wonder if the silence 10 is slightly different from the 20 . it was just lightly pinging the spokes but not touching now. will keep an eye on it. may end up fixing it directly to the chain stay if it happens again