Have seen these panasonic cell packs advertised https://www.amazon.de/Akkupack-Panasonic-NCR18650PF-Lithium-Ion-Entladestrom/dp/B01KNXAPLC . They look good quality and pre-welded but i would need to fit a BMS, which is just soldering work.
I can re-use the BMS off the old battery but might want to fit a new one. It is of the type where the charge AND dis-charge are combined. I also need shrink wrap and yellow tape etc Can anybody recommend an online shop to get all this stuff from?
Wanted to go this route in order to create a lightweight replacement circa 1.7kg versus current 3.5kg! It's a commuting bike so power rating of 313ah is good enough, plus needed this type of single connector BMS.
I can re-use the BMS off the old battery but might want to fit a new one. It is of the type where the charge AND dis-charge are combined. I also need shrink wrap and yellow tape etc Can anybody recommend an online shop to get all this stuff from?
Wanted to go this route in order to create a lightweight replacement circa 1.7kg versus current 3.5kg! It's a commuting bike so power rating of 313ah is good enough, plus needed this type of single connector BMS.
