Advice on which Bafang spare display and controller are better please

[Alan Bee]

Love my BBS02B , although despite being ever so gentle and having only covered 50 miles .It has completely stopped .

Not a dicky bird ,no lights or noise .So Decided to try programming cable and it does connect to controller .

I think best plan is to swap contoller and display and see what happens.[have power from battery to motor ,upstream from XT60 connection]

SO could anyone recommend a ROBUST display and contoller with updated MOFSETS

Also perhaps where to purchase. Kind regards Alan

 

[soundwave]

Homepage → Cogs Y Gogs - eBike Workshop Supplier & Installer

Gweithdy beics ac beics trydan We service and repair Bicycles and Electric bikes. Cogs Y Gogs North Wales Bicycle & e-bike Workshopfor all your bicycle servicing and Repairs VIEW OUR SERVICES & PRICE LIST Your one stop shop for bicycle and e-bike servicing & Repair Spaces Available NOW Tel-...

www.cogsygogs.co.uk

Sabvoton 150A Controller UK

Sabvoton SVMC programmable sinewave motor controller works with high efficiency, less noise & lower energy consumption,which makes your electric vehicles or electric motorcycles more comfortable and easier to control. Our designed friendly interface for the programmable motor controller allows...

www.ebikemodshed.co.uk

Phaserunner - Grin Products - Product Info

The Phaserunner was our first major controller partnership with ASI to bring their high performance field-oriented controller platform into a form factor and connector standard that worked well with ebike systems. It can support up to 72V nominal batteries and works well with systems running...

ebikes.ca

.

VESC Project

vesc-project.com

 

[Alan Bee]

Thankyou for a quick response, also wondered if there is anything else I,
could do to diagnose the problem . I have a multi meter and tried unplugging brakes and speed sensor.
absolutely DEAD after leaving outside [under a tarp]for a week or so.Battery is a good one. thanks

 

[soundwave]

well if it has been out side in the damp then the display could have some corrosion on the pcb and killed it as those controllers are potted so nothing can get to the pcb.

 

[Alan Bee]

ok if display is knackered , could i still expect anything else to work? throttle or PAS . I have a programme cable . with thanks Alan

 

[soundwave]

 

[Alan Bee]

Thankyou Soundwave for the links to controllers etc. I have e-mailed them for more info.
plugged the cable in but still nothing ,so i guess problem is elsewhere .i may buy a display as spare and diagnostic anyway .I have only used the bike for lazy dog exercising so far, not over 10 mph as the pooch is 9 years old was hoping to get more than 50 miles before stripping it down .cheers.