Where to place the controller, and attaching the pedal sensor are often the two parts of a hub conversion that take the most thinking.
Never been able to use the ring mount as intended, screwed under a cap. Not going to use glue, so I end up fabbing a DIY mount for the sensor. I've tried the integrated units, but didn't have a wide enough gap on either side. I've often had to move the ring to the non drive side and fiddle with sensor alignment to get it to work backwards. Good thing is I've never had a PAS fail.
Never been able to use the ring mount as intended, screwed under a cap. Not going to use glue, so I end up fabbing a DIY mount for the sensor. I've tried the integrated units, but didn't have a wide enough gap on either side. I've often had to move the ring to the non drive side and fiddle with sensor alignment to get it to work backwards. Good thing is I've never had a PAS fail.
