Hi, After three years I am having to replace the chainguard and also investigate the loose chainguard bracket and pedal sensor (believed to be secured by a fixing ring) Now my immediate problem is the removal of the crank. I have undone the 14mm bolt at the centre to reveal a square section shaft upon which the crank sits. A few of questions;
1. Is the pedal crank an interference fit on the shaft?
2. Do I require a special puller?
3. Is there a tip on how to remove the crank, short of being an animal about it with a length of wood and a heavy mallet?
A speedy answer would be nice, before I break something.
Thanks
1. Is the pedal crank an interference fit on the shaft?
2. Do I require a special puller?
3. Is there a tip on how to remove the crank, short of being an animal about it with a length of wood and a heavy mallet?
A speedy answer would be nice, before I break something.
Thanks