As a little bit of nostalgia for some of the longer term members, I thought I would provide a brief update on my 2008 Kalkhoff Pro Connect. This model is powered by the 24 volt Panasonic crank motor and cost £1500 (about £1250 after Cycle scheme discounts)
I bought the bike new in June 2008 and used it almost every day to commute to and from work (20 mile round trip). This continued up until 29 January 2016, after which my place of work moved making it a 100 mile round trip, which is too far to cycle of course.
On 29 January 2016, the bike had done just over 22000 miles, had a new motor at about 16000 miles, and a new battery at 17000 ish. The new motor cost £100 (old stock) and the battery (18 Ah) cost £550. I tend to run chains and sprockets until all the teeth are worn away and the chain starts jumping. I get about 8000 miles from a chain and rear sprocket (Alfine hub gear) and about double that out of the front sprocket, so not a huge outlay. I think it helps running 1/8" beefy chain and meaty sprockets, which the Alfine hub gear allows.
After arriving home from my last cycle commute on 29 January 2016, I gave the bike a thorough clean, charged the battery and parked it in the back of the garage. I never touched it again until 9 April 2017. The battery was still fully charged! I literally switched the bike on and went for a 35 mile ride, arriving back home with plenty of charge left. The bike is still a very strong hill climber whilst being a smooth and refined cruiser. Out of curiosity, I tried the original 9 year old Panasonic battery on the bike. This still works, but I would guess that the range is down to under 10 miles. Not bad for an old battery though.
This bike still looks brand new. What more could you want from an ebike? I know I keep asking the same question, but why did Kalkhoff incrementally make their bikes worse with each release?
I bought the bike new in June 2008 and used it almost every day to commute to and from work (20 mile round trip). This continued up until 29 January 2016, after which my place of work moved making it a 100 mile round trip, which is too far to cycle of course.
On 29 January 2016, the bike had done just over 22000 miles, had a new motor at about 16000 miles, and a new battery at 17000 ish. The new motor cost £100 (old stock) and the battery (18 Ah) cost £550. I tend to run chains and sprockets until all the teeth are worn away and the chain starts jumping. I get about 8000 miles from a chain and rear sprocket (Alfine hub gear) and about double that out of the front sprocket, so not a huge outlay. I think it helps running 1/8" beefy chain and meaty sprockets, which the Alfine hub gear allows.
After arriving home from my last cycle commute on 29 January 2016, I gave the bike a thorough clean, charged the battery and parked it in the back of the garage. I never touched it again until 9 April 2017. The battery was still fully charged! I literally switched the bike on and went for a 35 mile ride, arriving back home with plenty of charge left. The bike is still a very strong hill climber whilst being a smooth and refined cruiser. Out of curiosity, I tried the original 9 year old Panasonic battery on the bike. This still works, but I would guess that the range is down to under 10 miles. Not bad for an old battery though.
This bike still looks brand new. What more could you want from an ebike? I know I keep asking the same question, but why did Kalkhoff incrementally make their bikes worse with each release?