10 speed with hydraulic discs

[lukepearce85]

My bike is 10-speed (SRAM Rival 1x10) with hydraulic disc brakes.
Can you suggest a rear-wheel conversion kit that will work with this set-up?
Thanks,
Luke

 

[Laser Man]

The MXUS XF08-CST kit from Woosh will take a 10-speed cassette.
(Best check with Woosh that the lowest gear will be usable though - the biggest cog will be very near the side of the motor).
Fitting hydraulic brake sensors is a fiddle, but perfectly do-able.

 

[Nealh]

If the stack height of 10-sp is the same as 9-sp then any CST hubs will be ok.
If not fitting a throttle then no need to bother with cut out's.

Woosh or Yose CST kits.

 

[lukepearce85]

Thanks very much - both Woosh and Those look good, I didn't know about either of them before.

 

[bimboles]

Are the Yose kits street legal in the UK as most rear wheel ones seem to be rated 350v?

 

[Nealh]

350v that would be something.
They are marked 350w my one was etched/stamped on the gear side casing and is hidden by the cassette.

 

[sjpt]

Strictly they are not legal as marked 350w. The law in this area (as in many others) is somewhat out of touch with reality. However, they have to draw the line somewhere, and a nominal 350w motor puts the bike into a totally different class. It is very unlikely to be an issue unless you had an accident. In that case it could be quite serious as technically you need MOT, tax and insurance; plus the cost of any third partly liability claims.

 

[bimboles]

Yeah sorry I meant 350w.

Sjpt, that's what I thought would be the case. Thanks for confirming.