Search results

Thanks . We’re in Portugal at the moment so will keep an eye on it. We don’t normally do much more than 20 miles so will make sure to put on charge after each ride Thanks again Trevor

Thanks for reply. It’s reading 38.5 so is that not good?

Could anyone tell me which terminals to check the voltage on a 705 Torque 575 battery please? What reading should it be and what is acceptable? Thanks Trevor

New throttle arrived today and it works so now I've got a very happy wife Thanks for all of your help and advice Trevor

Thanks everybody for your help. I've ordered a new throttle assembly from Wisper and am hopeful that will correct the problem

There are actually two male connectors from the controller with red, yellow and black cores. One of these comes from the gland that also has the battery and motor connections. The other is from the gland that has a four sets of smaller diameter cables plus the two linking loops. Of the two...

Sorry it's a Wisper supplied controller - image 004 attached Please also find attached photo P1080612 showing the nick in the yellow wire insulation, the conductor seems intact. P1080614 shows the connector to the controller I've taken the throttle control off of the handlebar but it would...

Nealh please find attached photo of throttle connections. My eagle eyed wife spotted that there's a nick in the yellow wire so that could be the problem. I think the third photo P1100758 shows the controller end connection Sorry for being vague but I thought I'd said that it's a Wisper 705sel...

Sorry for delay in replying I was out all day yesterday and most of Sunday. I've tried disconnecting both links and no change unfortunately. I was very careful when reconnecting the new controller to make each connector in turn so I'm pretty sure both of those links would have been made at that...

Resending photos

Ouch! harsh but justified I think! Hopefully these will be more useful and apologies for the first ones Couldn't find a nest to photo...... I'm pretty sure that the connector with the red/yellow/black wires are the throttle ones if those colours have been continued through from the throttle as...

Hope these help

I disconnected and then reconnected each plug and socket in turn so hopefully all okay there. I have spoken to tech support a couple of times but they didn’t mention a setting that disables the throttle but it would be great if that was the solution. I haven’t measured the voltage as I was...

Can anyone help please? My wife has had a Wisper 705SEL for a number of years and it’s been perfect for her particularly since she had a replacement knee. I had to replace the controller (WCN0029) late last year after the assistance failed (very grateful to Adrian in Wisper Tech Support for his...