Search results

Hello all , I hope someone can assist me with the following request for help. I have a Greenedge CS2/16 with the std display and am trying to set the following settings within the display , but are unsure what value to give the setting within the set up for each of the following.. 26" wheel...

Hi all , bit a of a delay regarding this issue as it took nearly 6 months to get the halls sensors changed in the rear motor (which the display unit was showing as faulty). I refitted the motor and installed a another new PAS from EBikes direct see photo and now are getting a E01 error which...

Hi Nealh, really appreciate all your help. Tried testing the output on the lead with the voltmeter on the 20v setting, only getting 0.02 reading. I have tried all the combination of holes. Not sure if it is worth a punt on the sensor, but I will give it a go. Thanks once more for all your help...

Hi Nealh, it's julet connector

Hi All , I hope someone can assist me with the following issue I am having with my Greenedge CS2/16 E Bike . I returned from holiday recently , during which my bike got a thorough rain soaking on the bike carrier (the battery was not in place). After leaving it for several days to dry out...

Hi vfr400 , thanks for your response regarding my issue ,it is very much appreciated. the description of the sound is very hard to explain it is whisper quiet when I rotate the wheel forwards or backwards, but it does feel like the bearings have pitted. I can feel the roughness and very slight...

Hi All , Could anyone please help with the following question I have. The rear wheel bearings sound as if they are going /gone (usual symptoms) on the rear wheel on my Greenedge CS2 ebike. Has anyone replaced theirs/ re-greased them, or are aware if the bearings are lose in a cup/cone...