Search results

Hi guys, I'm in a bit of a pickle here, So I build myself an steath bomber a year ago and I ran thru a lot of different parts to see what would work better or just work without blowing. So I have a bafang rear hub it's a 1000w 48v geared hub (I can provide a model number if needed don't have it...

Could it be a faulty throttle and that's why when the self learning cable is disconnected nothing happens or because originally the kit come with a 5 wire thub throttle and only an original controller with a thumb throttle will work ??

Hi , so I bought a new controller you suggested and it gives me the same problem , but this time I does launch the wheel full speed for a couple of seconds and then it goes spinning really slow . That happens with the self learning cable connected if I do disconnect them nothing happens . I have...

Hi , so I bought a new controller you suggested and it gives me the same problem , but this time I does launch the wheel full speed for a couple of seconds and then it goes spinning really slow . That happens with the self learning cable connected if I do disconnect them nothing happens . I have...

Thanks for all the help . I'll try one of the controllers that you have. suggested . And yes I've should research more before went to buy anything. But I just wanted to get it cheap and fast and I ended up buying the wrong parts .. Thanks again. will update when I get the new controller ...

That's all I have on it

Hi guys I'm pretty fresh on ebikes , and I had stumbled across a few issues but the main question is with is the best cheapest controller i can get to make it work . I've got my self a new controller it's a dioche 36/48v 38ah 1000w but my battery is only 15ah 36v ,so my best guess is that the...

What would be the best controller for a voilamart 500w rear hub wheel and a 36V 15A battery . Because I think the controller I have the low amp that the controller can supply is not low enough for my battery to make it function correctly. right?

So I changed controller because the other one died . So you saying that because the controller is rated 38A and my battery can supply only 15A . Is that the problem?

The grey EBS wires are disconnected and If I turn it on with the green ones connected the intelligent sensor or learning wires the wheel will spin with no control if I turn it on with the wires disconnected nothing happens no response from the throttle .

When I disconnect the self learning wire the wheel stops spinning but still no response from the throttle

Hi guys in simple words I bought a new controller that has an alarm system and I when I connect the ignition cable to the battery +36v it just starts spinning with no cotroll what's so ever . Anyone that has been throughout a similar issue , the controller is Dioche2smnpotyiu 36/48v 38amps...