Search results

Mine kept going and works fine, just shows error 21H. It would cut off after 5 mins until I turned the auto shut down off.

I turned mine off in the menu on the display. Depends which model display you have.

Mine functions fine albeit with no speed/distance etc. I did turn off auto power off to stop the motor turning off. I have just received a new controller from PSWpower and am yet to fit it.

There is actually a micro switch inside the cable lever in a waterproof silicone sleeve type thing, I used one of these and Heath Robinson-ed it to my rear brake handlebar mount and fashioned a small flat lever to cable tie and tape to the brake lever that releases the micro switch when...

Thanks for the reply, If you flick through the post you will see that I managed to fit the mid drive unit and get a 21ah battery in the frame. All a bit of a squeeze but it went.

Hello again, just a quick update..... Following much testing and about 150 odd miles on tracks and fields/woodlands I decided to change my cassette to an 11-42 along with a Wolf tooth Goat link and it fits very well. My main concern was keeping the revs up on steep steep hills and the exsisting...

I have been out most of the day today riding and covered 30 miles or so on cycle tracks and challenging woodland tracks. I have been up hills that would of had me on my back before the upgrade and I have enjoyed an evening cycle with my very fit 17 year old lad. I don't have any speed...

No, I left an expansion loop to allow swing arm movement.

The cable to the sensor is not too tight, the magnet is about 2mm away and the light flashes when the magnet passes. I did change the units to imperial and battery voltage and wheel size. I did a factory reset and tested again and it was the same. My first choice would be to test another speed...

Did you notice if the light was on the sensor when the fault was showing?

I already tried that, I have taken all of the tie wraps off to make sure, also taken the plug off and refitted. I was travelling on a tarmac cycle path when it first showed on PAS 5 and pedalling. I had used just the throttle to coast prior to the code showing.

Another interesting day in the self build ebike world. After securing the battery and putting the butchered bag over it I took it out for a test ride. after my 10th event free mile an error code came up on the 750c display of 21H and a picture of an engine. A few seconds of research led me to...

well the battery arrived today, it is a tight squeeze as the stated dimensions were slightly smaller than the one I received. I cant fit it with the bag as it is oversized and padded. I first took the padding out where it mattered but it didnt help. I have mounted the battery on foam pads and...

Looks great Peter, Can the battery move up the frame a touch to give clearance by the shock. I guess not or you would have done it already.

Meanwhile......I'm still waiting for my battery. You have a production line going there Peter.

Another Voodoo!! It looks like new.

I notice they do a 40T one with a replacement motor cover to enable it to fit.

I have ordered some loctite earlier. There was a huge sigh of relief when it all went together. been for a quick battery free ride and all 10 gears work ok but time will tell. Bodge

BTW, I went for the 44t chainring luckily but reckon I could get away with a 42T. I added 7 links to my chain to accomodate the larger ring. What is the smallest dished chainring that I can fit to the BBS02? Bodge

Well, I ordered the BBS02B via Amazon from PSWPower initially holding off on the battery to make sure the kit fitted. I then had a look on PSWPower website following the link from Peter.C. Worked out about £50 cheaper so I cancelled my Amazon order and ordered from the website. The kit arrived...