Search results

C2 is at 0 at the moment what do you suggest I set it too ?

All the current settings are KT Set up YOSE motor are listed on the attached photo.

The YOSE motor is AKM 2 please see photo attached. The Julet connection are all good and tight although these pre made looms are very long and untidy. Frame wire fishing will be my next hobby Also Thought I would try the Gtech motor on the same KT controller it works ok initial test ...

Thanks for the links. I can not find Phase angle in the settings the down load from top bike is https://www.topbikekit.com/LCD4%20display.pdf that I am using. I have been going through all 3 sections and so far have got the motor working the drawling sound has gone I think ! But it still...

Ok thanks. Phase angle in the settings ? Can I sort this in the KT LCD screen ? I have downloaded the Full PDF manual. I am sure the motor is ok as I tested it when I bought the kit it was left over from the Vulcan build When I used the Suntours and YOSE kit together . A Drawl like sound is...

yes I agree it does not matter how it’s propelled without peddling or what you call it throttle , push button , twist switch otherwise disabled scooters would be illegal as they do not have pedals and cand be propelled by a motor and battery. so the only issue is the speed one can go under...

Yes and looking at the lime bikes I think they have at least 500 W so maybe like scooters they have a dispensation of some kind or both motors are being limited to 250w. but they are very heavy and have lots of torque.

Hi looking for some advise on a bit of mix match kits that I have left over . I am converting a classic Giant road bike test stage photo attached. I have a new 250W YOSE motor that I know works as t will work with the YOSE controller. But I have a KT Controller and the KT LCD 4 from Top...

yes they are not really pedal bikes but as we where going to buy an electric motorcycle but can not get one safely parked down my house side ally way a a good compromise would be a legal fat tyre mop head and the costs are attractive too.

Thanks for the input very helpful

Thanks for the reply Larkbox sorry for the delay been very busy starting a new building contract all this week

Wow ! sorry if I have not read all of this yet I was working today . I thought of this too when holding a bike back wheel off the ground it’s going to go faster on the clock without weight on it . I think to be on the safe side and protect my professional driving licence I will just unplug or...

Ok so if a bike say with a YOSE or KT controller that has the function to limit any throttle thumb , twist and or push button . Has a marked 250 w motor from say YOSE . Has no certificate of any kind has not been inspected by any one. Gets stoped by the police and possibly DVLA they regually...

Hi everyone Again on the News BBC this morning a member of Motor Cycle Federation stating any pedelec with a throttle is illegal. I have seen the threads on here stating a throttle that is limited to 4MPH without using pedals is legal. Does any one have any legal documentation to prove this...

Yes the clip makes it much more suitable . Any way after a lot of messing about got it wrong the first time . Its now fitted I had to cut the hole in the center big enough to go over the bottom bracket retaining bolt because of the design of the crank . The clip held it all together just hope...

Found this attached from a local shop Electric Bicyle www.electricbicylecompany.co.uk Sean the owner has some really interesting large bikes. This magnet ring he gave me for a fiver is so much better than the stuff online that I have been looking at

Photos missing again !

Thanks guys so I have started the build on the Spezalied 28 inch light weight that I will keep . 250 W YOSE rear wheel drive motor left over from Carrera build , I will use a KT controller as per your advise. not sure yet how as to battery position and type Frog, Down tube or rear rack. The...

Morning I had a large g clamp in the shed so I clamped the drop out on the Carrera for a few hours after that I was able to get the YOSE wheel on it . I am not going to use it though not to sure about it sort of forcing it like this. it puts a fair bit of tension strain on the drop out. Also the...

Thanks again your the man lol I just bought a whole Vengance 2024 wheel with a Bafang motor from a guy who is building what I can only call an e motor bike Carrera so did not need it just waiting for it to come and hoping the nine pin Bafang motor wire will be the same as the YOSE kit or the...