Search results

Old nipple 4.3mm New nipple 4.8mm

I ordered the following. Sapim Leader - 13G - 2.3mm - J-Bend - Silver 7 94269 Sapim 14.5mm 13g - 2.3mm 56tpi - Brass Nipples - Silver

Just an update! I ordered the spokes. I ordered a cheap caliper of ebay which gives a reading of 2.2mm on the old spokes and 2.3mm on the new spokes. However i also have a problem where the new nipples will not fit in the wheel. The new nipples are bigger in diameter than the old nipples. BTW...

Hi Following on from my previous thread in identifying a rear hub. I have a few missing spokes. I removed one to measure it. Can someone please confirm the correct length I need? Thickness? Nipple size? Where to get them from? I have no clue about spokes. I know they are j bend and have a...

Thanks very much

Hi I hope these pictures are ok? cheers

Hi guys Can anyone help identify what rear hub motor this is? It is a Bafang with the following numbers printed on it. Bafang BFY1801H15240-1 Googling does not bring up any results. Thanks

How much efficiency is lost by going with 36v instead? I wont be using this new motor for long distances at all. A bit confused now because i have read in many different forums threads a 36v q128 is a good idea at 48v. Thanks

Many thanks So what do you guys reccomend i go for good torque low 20's top speed Cheers

Much appreciated Nealh. Only reason I was considering the 36v motor was of a few threads i read. 36v hub powered by 48v would be 33% faster overall. Torque and speed. For off road use a bit higher top speed would be good. My current swxo2 tops out at 18mph. The steepest hill i have around...

Hi guys I currently have a wooshbikes SWX02 kit fitted to my bike. Happy with it, no issues. Motor is currently mounted on a 700c rim. What i would like to do is get a 27.5 rim with a motor so i can have more tyre clearance. The kit i have has the following... Lishui 48V 17 Amps sine-wave...

Hi guys, Still exploring my options. I have checked out pswpower on ali express. With my requirements described above. Would the following be suitable for my needs.... XF15C-Rear-48v-500W https://www.aliexpress.com/item/4000413917149.html?spm=2114.12010615.8148356.63.38ce4107YHZPpM or...

Thanks for the infkrmation. Its the support hence why you giys are at the top of my list at the moment. I have a pm to pm adaptor and a 180mm disc hanging on the wall so thats not an issue. In that case you recommend the DWG22C? I will send you the details you asked for. Thanks

Hi Thanks for the advice. I will look into your suggestions. I did think about getting a wheel already built but it don't really matter apart from i know i can get a half decent rim laced to the motor. Either way is ok with me. I have a 8 speed cassette.

Many thanks for your replies. The bike will be stored inside out of rain. I wont mess up the extra rivnut installation.(hopefully not like a fork install yesterday where i didnt measure the stem and had to fit the fork with no spacers, was meant to have 50mm spacers lol) I have an extra...

Hi guys Sorry a bit long winded but need some advice. Great forum, read and learnt lots. I been riding bikes on and off for years. Pretty proficient in fixing just about anything on a bike. I have a couple of questions. I commute 10 miles each day. Not a great distance but two big hills...