Search results

I didnt notice any more noise from my Dapu motor neo cross.Maybe thats only a problem for the bafang motor?I belive Pedego uses the Dapu motor on 48volt without problems.

Yes I am waiting for a review ;) but it looks like it need a lot of dishing

Murphy`s law It hits me everyday

I am not sure the dapu motor can be deristricted.I can feel the assist up to 32kmh.but weak after 28-29 kmh.But you can run the whole system on a 48v battery with no problem.controller and display accepts it.It will then get more climbing power and ca 40 kmh max speed.as far as I know the neo...

Ok,have you tried the new Q128 H motor?

I have also tried many diffrent ebikes and I prefer non torque sensor.Imo the "cheap" torque sensors are not good enough yet.My neo cross is a very nice bike .but the torque system is not as presise as I would like it to be.It cuts on and of to much.I liked the new bosh motor system but thats...

Is that a Q128H 800w motor D8veh?

If this new oxygen bike can be derestricted to do 27 mhp it must be more than 270 rpm.and it still is the best climber then I guess it runs at a lot of amps? 30? how is the climbing ability of the panasonic motor vs the neo dapu hubs?

I sold the CST kit to my friend.He changed the connection to the battery.He used andesrson plugs.And he told me the power was much improved.He really liked the motor now.I havent tried it yet.

If the info is correct on greenbikekit.the motor is 265 rpm.And if the info on elifebike.com also is correct.Then their cst 250w motor is 205 rmp and better for hillclimbing

This looks like the mxus motor http://www.aliexpress.com/store/product/BTN-new-hot-and-cheap-electric-bike-center-motor-electric-bicycle-center-motor-330USD/705369_1858996195.html

Thanks,Then it will be 48volt and S09P with a nuvinci n360.looking forward to try it :)

Thanks d8veh.I forgot to mention I was planning running it at 48volt and about 20 amp.I was thinking about using S09P complete controller kit with throttle.And speed sensor if compatible.But I wont have any motor problems when running sensorless?

My old controller on my Tonaro Bighit is broken.Can I use a sinwave or a sensorless controller from BMS battery?

My tonaro (soldered about 25% of the shunt) climbs steep hills better than my bafang cst and bafang bbs 02 48v 500w.but slow.the tonaro keeps going where the two others stalls(no pedalling).At 48 volts with a 20 amp controller it is a really good bike.I have only tried mine for a short ride...

Rembember my friend compared the cst and the swxk5 both at 48v 15 amp.big difference.The battery he used was a high c rate.30 amp continuous.Battery works very well on his Bafang bpm 201rpm motor.

I will try it.I have to order a new bms for my batteryso I will add a s12s controller.I used this battery http://www.bmsbattery.com/48v/248-48v-10ah-lithium-ion-electric-bicycle-battery-pack.html It should be able to give enough amp for the s09p controller?

Sorry,didnt see you already had ordered

It must be something wrong with my setup? I am not impressed with the bafang CST at all.48volt 22 s09P controller.(22-23 Amp) I was expecting better accleration and better hill climbing than my orginal Neo cross.(36w 20 amp) But I was very dissapointed.there wasn much diffrence.The neo just...

Hello,I wanna know if there is antyhing legal " 250w" with more hill climbing coming :)