Search results

I have a Boardman 8.6 with BBSHD you will need a few spacers 4-5 mm for the reduction gear to clear the chainstay you will also not be able to use the largest gear (1st) as the chainline is not very good but i have over 1800 miles on mine with no issues spacers from Ebay item number 184854041213

Well Andy it looks like you have to jerk your arm up to set them flashing what if you dont jerk hard enough and assume its started to flash and then make your turn but the unit has not started flashing , another thing is because they are not the normal signal motorists are used to seeing they...

These look dangerous https://get.flasher.tech/?utm_source=Facebook&utm_medium=CPC&utm_campaign=a2&fbclid=IwAR32nfSJofqZFGhiIFWlXG6BacY_msf_CaIoDWhQZAGcqKCMyKMTMxv2zfc

shouldnt your brake hose be routed internal ?

You need to grind that ridge off where your brake line comes out of the frame or re-route the brake line externally i ground the ridge off on my brother inlaws Trek

''The bike has had very little use and only on tarmac cycle paths. It is ideal for off road use as well it comes with pannier ideal for touring . The bike has never been dropped and is Mark free. There is a charger and full intruction books. They are a great bike to ride with plenty of power.''

https://smartbikelights.com/products/farina?utm_source=Facebook_ads&utm_medium=Facebook_Desktop_Feed&utm_campaign=TOF+-+FARINA+-+ABO+-+HOME+PAGE&utm_content=FARINA+-+DYN+-+FARINA+PAGE&AdSetName=Cycling+mix+1+DYN+%2B+Online+Shopping+LK+%28UK%29+25.11+-+FARINA+PAGE

https://theconversation.com/cycle-lanes-blamed-for-urban-congestion-heres-the-reality-173388?utm_source=pocket-newtab-global-en-GB

https://www.rubbee.co.uk/

Looks good and maybe easy to make your own

Nice and to the point

Hmmm https://electrek.co/2021/08/31/radical-new-electric-bike-drive-systems-requires-no-chains-or-belts-entirely-ride-by-wire/

https://eclipsebikes.com/bafang-accessories-c-17_66/bafang-bbs-thumb-throttle-p-231.html

https://www.bbc.co.uk/news/uk-58021450

https://www.bbc.co.uk/news/uk-england-london-58009784

Are you sure the gear sensor is actually working ? does it cut the power at all? sometimes the wire gets some lube on where it touches the small wheel inside the sensor and the wire slips instead of rotating the wheel