Search results

Thank you Nealh, very helpful and noted the controller is in the base, does make any battery mods a bit irreversible

BTW I've a programming cable from. EBay. No idea what chip inside

Great! Does the forum think the adaptor might be key too? Sorry if a luddite question but I'm thinking some cables do data and charge and some just charge

Does anyone know if you can fit a revo motor to a Brompton? It's a friction drive Yep I know all the disadvantages but it is very small, lightweight and very cheap indeed (offered to me at 70 Inc charger and battery!) But forget the battery, I'd biuld my own very small one as it needs to do 5...

I owe everyone a long overdue answer and end result. Spoiler - it's isn't a happy ending I overestimated my soldering skills and completely screwed the pooch. I managed to melt the tiny resistor wires totally from the motor to the pcb. It did change the error code but that's it. Owner gave...

Thats a good call, maybe I can jerry rig something just to make the connections before putting in time to do a really good job I did worry that I might possible have caused the breakage when I open the motor but I plugged it back into the bike.... Same error so I'm hopeful it wasn't me

Actually I found another under H1 also. I'm going to attempt to resolder them but it's very tight and tricksy to get at one of them. It has snapped nearer the motor coil that the pcb. Still kids about to descend after school so this will have to wait till a calm point in the day when I can take...

I've found a broken wire! It's under h2

Inside motor

Sorry I've just all the responses! Brilliant. I will keep you posted

I will let you know but if I get to the point of driving to Chichester to a dealer I will hand back to my friend to take forward. He doesn't need me at that stage. However I'll keep you posted whatever as it's only fair after all the input you have given

Much aol Oohh, I didn't find a brighton one. I have left a couple of voicemail and an email for the Chichester lot already but no response just yet

If I could find anyone to plug the damn thing in into I would! I've appreciated the help from you all though, thanks

So the hibernation mode achieved the same thing. Clears the fault for a minute only. I can't get into the pack itself as although it has screws it is also heat bonded or glued. I will have a crack at getting into the motor itself tomorrow, just to see if there is an obviously destroyed motor...

I'm in worthing on South Coast. No idea as not my bike, just occurred to the owner

So I visited my local Halfords and explained my issue to a young girl of about 20 behind the bike counter. The look I got was priceless. I suspect I may as well have been speaking Greek. However, to her credit she fetched a old beardy guy from out back. He certainly knew his ebike onions but...

Hi folks, I had a final go last night..... Really thought I'd cracked it! By disconnecting the, I presume, can bus connector between the battery cradle and the controller I can make the error disappear. For about one minute before it reassert itself. Thing that confuses me is that the...

I've tried Halfords who didn't want to know. Also two other local dealers who say they no longer are dealers and never had the diagnostic software That leaves trans x who just emailed me back saying they can't help me as an end user - I must try the dealer!! OK, going to have one last take...

Blast, having just taken the dp27 off the handlebar it is apparent it is a sealed, glued unit :(

It's not under warranty so maybe I'll be disassembling the dp27 as next step The hot motor trauma event theory is a good one!