Search results

Sorted - Had to: 1.Go to a section where I could measure the diameter of the closed zip. 2.online the zip slider sizes are numbered size 4,5,6 etc , those numbers refer to the width of the closed zip track (mine touring panniers, closed zip track diameter = 8mm (coil/spiral) 3. Order the...

:D Ello fellow city dweller :D

Frenchay, Bristol :cool: :)

Hi Fellow Roaders I have a pannier set - with crap sliders. does anyone know HOW to order correct replacement sliders? and yes I did contact the manufacturers and the retailer both are radio silent, reversing Direct Debit is possible but too drastic for something like this

People are giving you advise - your not taking the advise that's o.k but at least say WHY? anyway back to your question the RED one you have is a 2 pin female, it needs a MALE 2 pin juliet connector, VFR400 has given you a link.

:-o to what torque?

Exactly how mine got misaligned either getting the back wheel out or back in. Only visible once the axles were fully fitted into to dropouts and the dropouts weren't the problem - Thankfully I worked at a bike repair shop so tool access wasn't an issue.

Probably - but at least you found a seller or person that is selling you're looking for - so a solution was got and the it's the solution you wanted/needed so it's a win.

YES!!! in10 years 2 of my bikes https://sheldonbrown.com/forkend-alignment.html and yes my bikes were still ridable even with the misalignment ;-)

Possible axle misalignment.

https://www.aliexpress.com/wholesale?catId=0&initiative_id=AS_20210225012913&SearchText=ebike+hydraulic+brake+cut+off Hydraulic brakes have a different power cut off than the normal kit so you would need to either chose a seller that will sell the option or buy separately. Going mid-drive...

Ah - then yes ... for sure you will need to contact a stomp/dirt/pit bike parts supplier

So you're after a threaded washer?

BTW - MY custom spacer ended up being originally for a dirt bike and then my mate cut it down to size, I then added a washer to the cut edge so that the washer/cut edge was flush against my frame. You'll see the issues here https://www.youtube.com/results?search_query=ebike+rear+hub+spacer The...

Yes. Do a search for stomp, dirt or pit bike parts/supplier, either in google search or ebay. Use all labels ie Dirt Bike Parts, Pit Bike Parts etc. I guarantee you'll find a supplier of 12 and 14mm axles and rear axle spacers.

Not really - I knew my spec so I knew what I could forgive and what I couldn't ... I knew 250w was out of the question because of the inclines and weight hauling I do, research told me the higher the wattage the heavier the motor, together with the battery weight ... that mattered, so by...

It would need to be limited - the motor capability is normally capped to ensure that it's not possible but myself I fitted an inline fuse between the controller and the battery... the fuse I use is 10amp but I carry smaller fuses so that if the motor ever got tested the fuse would blow instead.

IMHO a kit is a kit is a kit, I'm a hacker so if there's an issue after 6months or a year I'll not be crying to the seller to repair anything. If that's not you - that's something to consider. I don't have a mid drive, I have a rear because I like knowing that I can get home with a busted...

Folding bike on inclines? I had one, it was a 20inch - I sold it and don't miss it and my current wheel is 500w which handles inclines and weights with ease. I'm not a speed demon so there isn't anybody looking at me sideways on the road. So if your wheels are smaller and your inclines...

Interesting to know where?:oops: I know from experience @ St Philips Household Waste Recycling Centre I didn't have problems and was informed cyclists with trailers get to jump the queue (I had my recycling in my trailer). That being said an acquaintance phoned the same place to ask and they...