Search results

I haven't been overvolting motor and controller for a while now. It's just that I keep having issue. Here s the list of issue I had recently: 1. leafmotor 48v DD with 72v kelly sine wave controller. Battery at 15s: - I have 3 failed motor hall sensor in 3 years. 1 / year. I changed twice by...

Hello As I keep having ebike parts failing there and there.. and as I don't have time anymore to diagnose and fix, I'm considering getting cheap kit I could just replace when problem happen This one at £390 complete kit shipped...

Yeah makes sense...my parts are all diy

do you service any ebike part? got many to repair

So what's the best action? - to remove the box completely because water will go inside the gland whatever I do - or I put some waterproof silicone gel outside the gland

That's the only place I can put it due to the controller size. How best to protect knowing that wires needs to be here?

I sprayed few times with electric spray the entries and exit of the box. If that doesn't work, I'll deal it with glue gun or something similar

Ok, I've spent my whole evening putting all the hall, throttle, regen, signal wires into an IP68 waterproof box: I soldered the wires as I haven't found compact and reliable connector so far... Hopefully I won't have issue as fixing this will be lot of pain How it looks now: I've also...

Would this one work? https://www.amazon.co.uk/gp/aw/d/B076KKYNL4/ref=pd_aw_vtph_60_tr_1?ie=UTF8&psc=1&refRID=174R88QE1VVCY545S296

I don't think cable tie will be enough. See my picture

I've updated the picture, can you see it now?

Hello I have problem with my wiring whenever it rains. I tried lots of different techniques to protect the wires: - Wrap it in tape and food wrap to prevent rain from getting in. It does protect a bit, but also trape water which end up creating shorts - I've used sealant gel on all wires and...

Thanks that makes sense. But that also looks like a lot of hassle. Is there a simple way? For example like this anti spark connector...

I m at 60v. Is there any simple way to do that? I m annoyed to have to connect twice

Hello, Tired of doing solding with my bullet connector, I've replaced all of them with Powerpole 45A ones. I thought that crimping is a much neater and time saver option. However, there is a sparkle everytime I connect them to my battery (60v), and after one month, a chunk of my connector was...

maybe some sort of insurance scheme would be good? like £15/month contribution to get the bike fixed when you have issue

Latest and still ongoing: 14,000 miles in 2 years with my leafmotor 1000W. Only 1 failure to date (hall sensor). Previous: 2000 miles per BPM motor until they broke. All 3 had broken clutches 7000 miles on my mac motor until hall sensor failure 1500 miles on my bbs02 until it developped crank...

actually this one is 650g only: https://www.amazon.co.uk/Alloy-Casing-300W-Power-Inverter/dp/B01EZPRASA/ref=sr_1_6?ie=UTF8&qid=1497905794&sr=8-6&keywords=300w+48v+inverter does it worth it?

hello, I'd like to use my battery to power things. I'd like to have the most reliable and compact inverter for 48v+ battery. The best I've found is this...

I wonder what cell type it is too. I punctured and short few times my panasonic ncr18650pf and no fire I did bin them away, however nothing happened. I think there are safer 18650 than others...