Search results

I don't have the hub with me at home but I can look tomorrow for any other markings. I can measure the gear flange. I estimated the number of gear teeth would be about 20, so yours being 18 sounds right. Planet gears on ours are 36 teeth. Here's a comparison between your hub and ours

Here's the other photo I posted again of our hub with the clutch unit and gears

As you'll note, the circlip fitted on our hub is wrong too. Some fool has fitted an internal circlip instead of an external one!!! BTW I suspect the axle diameter of yours will also be 15mm for the gear.

Photos 58877 and 58878 look to be what is needed. The photo I posted of gear was only to illustrate the general look of the item we needed...it was an online screenshot of a dismantled hub to give people an idea of what we are looking for. This attached photo is my brothers hub and it has 3...

Well obviously your health is top priority and I hope you are feeling better asap. When you get back home and have any update, please send me a message. Best wishes for a full recovery.

Hi saneagle...hope you're feeling better and have improved health wise over the last week...have you managed to locate the spare parts box yet?

I really appreciate you looking and am hoping you'll have one of these spare when you're able to find that box. If you need any other info, please give me a shout. Hope you're feeling better very soon.

Hi saneagle...my plans to get info yesterday got scuppered but managed today. The 3 planetary gears are 36 teeth and the axle diameter is effectively 15mm.

Sounds good! I haven't had the chance to so far this week but I'm going to look again at the hub internals today and get back to you this evening with more info.

Do you have any of these spare? The front hub is from a 20" wheel shopper bike.

I'll look at the hub again and try to measure the number of teeth that would be needed to fill the inner circle of the 3 gear wheels that drive the hub shell and can also measure the axle diameter. I'm sure the planet gears and clutch are the same as the £12 ones sold on eBay...will check out...

Thanks for the link but I don't see the part I need there. The part I'm looking for looks like this: and this gear slides over the axle and its flange uses three screws to secure it to the rotor:

As the gear is missing, I'm not sure but I'd think it will be very similar to the one in pic 2, which appears to possibly have 20 teeth (counting the teeth across 180 degrees in the pic and doubling)

Thanks for your reply

Does anyone here keep old Bafang motor spares or know someone that does? I placed a wanted advert earlier for a Bafang front hub motor drive gear and thought I'd mention it here in case some people don't look at the classifieds. Any help much appreciated.

My brother recently acquired a non working older style (no disc brake mounting holes) Bafang 24V front hub motor which I'm overhauling but unfortunately it's missing its axle drive gear which should be secured to the inner shell by 3 screws. First pic attached is my brothers motor and the...

Thanks again Nealh...good sound workshop advice and will be doing so.

That's exactly the information I wanted to know, thank you very much Nealh! I did wonder if it unscrewed utilising the 3 screw holes but dismissed the idea as I thought the diameter of the screws used might be insufficient to garner enough torque to do that job and potentially damage the...

I've bought an old rear hub motor and need to disassemble it to replace the worn out bearings. I've attached some photos and hope someone has some knowledge of how to dismantle this type of hub design. There's only 3 screws on the outside of the hub and they're holding the cover plate with...

Thanks Nealh, that's interesting. I've seen that brand name mentioned before...is that what you think my one is?