Search results

That's good news John. Thought I was going to have to order from overseas. Don't know anyone else in the UK who has these. The 7 speed is the biggest I can get in with the size of my motor. As soon as I work out how to get the old freewheel off, I will order one. The latest freewheel remover i...

Cheers d8veh

Meant to say on previous post that I noticed Cyclotricity are selling a complete bike, similar to their Stealth, but with the 1000W rear motor conversion fitted. Selling for £1095. The kit is just under £800, so for anyone who doesn't want to get their hands dirty or doesn't feel confident...

Quick update. The kit is still working perfectly. It still impresses me every time I ride it. I am slowly upgrading the bike around the kit. Have upgraded the discs to 203mm for extra stopping power which also allows me to fit the rear caliper which now clears the motor, just. Have ordered a...

Hi Elecman Kit cost just under £800 with the 1000watt motor, 48volt 11 amp motor and the LCD display (which you need do deresrict the kit). The kit itself is well made and all the connectors are colour coded so you literally cannot go wrong. I had a few installation problems mentioned earlier...

Hi Hi Phil Just this second resolved my rear brake problem. I ordered a 203mm disc and an adaptor bracket and I can now, by about 1mm, get my calliper on. Very pleased. My brakes are hydraulic and are quite strong, so can haul me down pretty quickly. I see yours are cable pull callipers, so...

Have had the derestriction info from Cyclotricity. Bike accelerates a LOT faster. Reached about 29 mph on the flat on just the throttle (on private land). Couldn't pedal fast enough on the pedal assist. The freewheel has a 14 tooth on the smallest spocket. Will change it as soon as I can for one...

Finally got on the road for a quick test, albeit without a rear brake. All worked well, throttle without pedalling on the flat got to 20mph before maxing out. Pedal assist also got to about 21 mph before cutting out. Max speed in the settings within the LCD is showing at 72mph so it is obviously...

Hi Phil You got yours fitted a lot quicker than I have. Looks great and really neatly done.I'm not sure about the derestrict. When I set the parameters in the LCD it showed the max speed as 72 mph I think, so I have left it at that for now. I am nearly there now, just struggling with the rear...

Torque arms arrived today. Excellent quality. Actually managed to fit them to both sides of bike without much difficulty. Quickly connected up the battery, controller, LCD and throttle with the bike upside down for a quick systems check. Worked straight away. Full throttle indicated 61 kph, 38...

What can I say. Amazon confirm items dispatched. Thanks again.

Brilliant. Thanks.

Thanks for all that info d8veh. Wouldn't have thought about widening the frame. Scared it may have snapped. I have ordered 2 torque arms from Cycleeze via amazon. If Cycleeze could give them a hurry up it would be appreciated....... Unfortunately the build is now on hold until Monday as I need...

On another note (problem), with the disc connected to the wheel, there is only about a 12mm gap between the side of the motor and the disc, but the calliper is over 20mm from the brake pad back towards the motor, so no way will it fit. I doubt there is a calliper on the market that is less than...

Yep, 14mm axle and 10mm across the flat. Just noticed the derailleur hangs off an insert that overlaps part of the dropout, so don't really want to file too much off that, the other side could easily have 3 or 4 mm filed into it, but can't do one without the other!! The entire axle fits (just)...

Will check when I get home d8veh. I know the flat sides go in to the dropouts ok, although as you have mentioned in other posts, it doesn't go in as far as the QR axle, and the torque washer tab will sit outside the dropout. Bit of filing required possibly, although there is a nice flat bit of...

Couple of torque arms required I think. Are the Cycleeze still the ones to go for?

Thanks for that d8veh. That was the only thing niggling me. Everything else seems to be in the kit.

Hi Phil Kit has arrived today. Ordered Friday so no complaints there. As mentioned earlier the motor and wheel are heavy, about 8Kg. There must be a lot of windings in there. All the wiring appears custom made with all connectors colour coded so even I can't get it wrong. Haven't had time to...

Will do d8veh. Will hopefully arrive middle of next week.