Wayners's latest activity
-
Wayners reacted to matthewslack's post in the thread 25.4mm 1inch steerer forks with disc mount with
Like.
If you keep your eyes open, you can get Shimano MT200s for not much, especially if you are prepared to buy individual components when... -
To mount normal mudguards you could try these methods. SKS mounting clips...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Had another play with disc tonight and I think it's ok. Biggest problem is they are definitely junk knock-offs. Getting shards of metal...
-
Wayners reacted to saneagle's post in the thread 25.4mm 1inch steerer forks with disc mount with Like.
You screw the fixed pad (inside one) until it just touches the disc when you spin the wheel, then back it off until it doesn't touch. If...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Ok. No. I haven't got it correct. I can't see the pads so guessed. Ill have a look tonight again. It's supposed to be ⅓ / ⅔ pad showing...
-
Wayners reacted to saneagle's post in the thread 25.4mm 1inch steerer forks with disc mount with Like.
Have you adjusted them properly? It's very important that you get the back pad at the right distance.watch your disc as you apply the...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Mine are. Definitely knock-offs calipers. I'll upgrade to hydraulic at some point. Ride in was good though.
-
Wayners reacted to AndyBike's post in the thread 25.4mm 1inch steerer forks with disc mount with Like.
Well done. Good you got something and fitted them.
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.@Raboa...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Update. They are on. Run out of time so I need to check adjustment and fit mudguard. I'll update this thread in a week but anyone...
-
-
Needed to get a new set of decent hydraulic disc brakes for one of the bikes. Found you can get genuine Shimano MT200 on aliexpress for...
-
Bargain weirdly useful and at times indispensable tiny adjustable wrench. There's always a tiny nut to hold down, when nothing else...
-
Not in my opinion.. an old spoke with the original thread sanded down a bit makes the best tool to inset nipples into deep rims imho, a...
