Wayners's latest activity
-
Wayners replied to the thread Yose Power Hub- need a new rim!.Hi all. Am I right in thinking I'll never buy a matching spoke nipple? 14.2mm long. 2.5mm thread for a 5mm rim hole. Maybe the best way... -
Wayners replied to the thread Yose Power Hub- need a new rim!.I ordered a new park tool spoke key from Amazon that's just arrived and it don't fit. Fits my other bike wheel though. Guess I'll have...
-
Get some tape and block off all the unused castellations on your spoke tool ( top of pic) , It will save you LOTS of frustration.. I...
-
Wayners replied to the thread Yose Power Hub- need a new rim!.Update. New rim seems fine. I'm in the process of swapping which is taking time. I'll have another go tomorrow which should see it on...
-
-
Customer feedback: Hi Andy, Thanks for the bits. I finally managed to find time to fit the kit and try it. All I can say is AWESOME...
-
Wayners replied to the thread Yose power.Nobody has mentioned the new woosh rear hub kit as an alternative. That's worth a consideration
-
Wayners replied to the thread Yose power.I have two menus on my yose. I read that the 250w now don't have the 2 menus then I read that it actually still has? Not sure what to...
-
Wayners replied to the thread Yose power.I fitted the front wheel yose kit. I'd recommend the rear wheel though. For the money it's a good buy at around £400 and a bit cheaper...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Update. Bought the 31mm to 34mm SKS mounting clips off Amazon and a really tight fit. Did plan to put rubber under but they are tight so...
-
-
Wayners reacted to matthewslack's post in the thread 25.4mm 1inch steerer forks with disc mount with
Like.
If you keep your eyes open, you can get Shimano MT200s for not much, especially if you are prepared to buy individual components when... -
To mount normal mudguards you could try these methods. SKS mounting clips...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Had another play with disc tonight and I think it's ok. Biggest problem is they are definitely junk knock-offs. Getting shards of metal...
-
Wayners reacted to saneagle's post in the thread 25.4mm 1inch steerer forks with disc mount with Like.
You screw the fixed pad (inside one) until it just touches the disc when you spin the wheel, then back it off until it doesn't touch. If...
-
Wayners replied to the thread 25.4mm 1inch steerer forks with disc mount.Ok. No. I haven't got it correct. I can't see the pads so guessed. Ill have a look tonight again. It's supposed to be ⅓ / ⅔ pad showing...
-
Wayners reacted to saneagle's post in the thread 25.4mm 1inch steerer forks with disc mount with Like.
Have you adjusted them properly? It's very important that you get the back pad at the right distance.watch your disc as you apply the...
