Recent content by mechaniker

yeab, 2008 did came the a lot of conversion kit companys and a few of them sold as "midmotor" the cyclone-kit including me but that motor was not reliable and noicy and if I remmember correct it had only two senor for the hall. As a mechanic I did saw the potential of those upcoming...

I always have trouble with my 150kg and my hubmotor-bike climbing hill´s so I thought of a different way and placed my shengyi-x2 Hubmotor into the rear carrier, now I´m able to climb easy the hill, even much better as with my 90nm centermotor bike:cool: In the begining I wanted to place my...

@Peter.Bridge sadly I never noticed a shop for such a kit. If I would be younger, I would open a shop just selling such kit but It´s to late for me because I did already crossed the 60 and planing for my retirement:) Controller-setting depends on what you order, naturally torque-controlled is...

@Az. very simple, selling our "Lishui" ebike controller or our ebike-systems to the bike-manufacturer in europe. Lishui is one of the biggest manufacturer for ebike-controller in the world and used in many bike-brands;) Why use MTB frame but street-tire? MTB-Geometry give´s a totaly...

@flecc thank you. @Az. Cable out is correct. Tyre is correct since they must be silent because when I present for "Lishui" our controller inside my bike at various bike-manufacturer and productmanager all over europe it doesn´t make any sense to use mtb tyre since they are so noisy that...

I did had a bit time and bought myself a Carbon-Fiber MTB frame for 148mm thru-axle because I ordered a motor for this purpose but unfortunaely the motormanufacturer is still not ready with this new developed 2,4kg motor which has 50nm of torque. Fortunately the frame was send with drop-out for...

After eurobike I found some time to take care of my new Bofeili "thru-axle" Motor ;-) The Motor has 2,2 kg , 142mm wide, 12mm thru-axle, 35nm torque and has a cassette integrated torquesensor from Kclamber, 8-bit version Since I didn´t had a bike for thru-axle I needed at first convert one of...

After looking at many pedelec-rider(specially woman and older man) I always wanted a pedelec which is simple, noiseless, no gearshifter with Torque-sensor and maintenance free and clean without oil or grease Simple and comfortable in use where nothing can go brocken. Simple at it´s best. So I...

If it would be up to me, you could already buy those motors.... but it isn´t up to me. I was thinking about converting those motors myself as a business but it is not efficient so I gave up on that thought. I assume you know sales manager Daniel from Shengyi, maybe you give him a call whether...

On my gravelbike I use 10 speed with shengyi dgw12 (2,2kg) motor with integrated cassette-torquesensor but with a different ratio setup as on my MTB´s, Trekking or citybike. My latest build-MTB will get a 12-speed "sram-eagle" with cassette integrated Torque-sensor 10/50teeth sprocket. I know...

If I see it correctly, you used xofo-motor? I myself assume to know every single Torquesensor useable for hub-motor ebike on the marked and have tested them all in my private bikes (still are in my office from Thun, Sempu, erider, Ncte and so on). Additionaly, when I visist bikemanufacturer...

speed-signal, PAS-signal, torque-signal all signal come now from the casstette and goes through the white cabel of the standard 9-pin Motorconnector by u-art transmit to the controller. So no change in motorcable connector is necessary but of course a different pcb inside the motor and a...

Hi K2@home, Like I said, no motor that I´ve driven so far has convinced me, only the one I made myself I would give recommendation but you can´t buy it for now... yes, the 6-bolts of the sensor are just installed into the motorcover there is no ready solution for your purpuse that you could...

a torquesensor is for me a must have Item to get a normal bike-riding-feeling. The bottom-braket-sensors make to much trouble in my eyes and the most of them have an old style square-tapered axle:rolleyes: as someone who crack those axle´s easy with my 150kg I have spend a lot of time in...

I could tell but since I´m just the employee who designed and invented the sensor...... the legal part belongs not to me so I better keep my mouth shut for now, sorry. I´ve setup my torque-sensor so that it need a PAS as well for safty reason but I could setup without PAS. The controller need´s...