It has been some two years or more now since Tony aka anotherkiwi has graced these pages with his experience and knowledge. Having moved from uprights to trikes he then developed a passion to build a Velomobile so jumped ship to a more specific forum or two, one in Germany and one in France where he lives.
Well he accomplished his dream of a trike velomobile all hand crafted by him self, the skills weren't an issue to him as he was an accomplished small boat builder skillful in the use and bending/shaping of plywood and epoxy fibreglass.
Some might remember he lived in one man little apartment /flat some two floors up and he used it also to build his small craft inside and posted some pics of the small space that accounted as his living quarters come workshop, his girlfriend never lived with him as there was no room for her as well so they lived separately.
Below I post two pics of the project AK started during lockdown 2020 and finished last June.
The gearing is Alfine 8 and the drive is a BBS01 with an external KT controller and lcd, folks may remember he like me had one of the early GSM's from Woosh but unfortunately he snapped the main drive axle on his one following a crash on his trike. With it mounted on the boom he had an off where he was sent flying over the front end due to having hot rodded the power with a little to much current.
On one of the forums abroad he has partly documented the build which I have been catching up on and has various pics of his process and the patience needed as he had little or no money due to lock down and no work.
The design is an Agilo I believe and is serial #001 as one buys the plans etc from the designer as a self build project.
Here the finished Velo sits on his 2nd floor veranda/balcony ready to be winched down to the ground. The forum sadly lost a very knowledgeable and clever contributor but obviously someone else has gained him.
Not bad at all weight wise a fully encompassed trike velo coming in at a remarkable 41kg.
Well he accomplished his dream of a trike velomobile all hand crafted by him self, the skills weren't an issue to him as he was an accomplished small boat builder skillful in the use and bending/shaping of plywood and epoxy fibreglass.
Some might remember he lived in one man little apartment /flat some two floors up and he used it also to build his small craft inside and posted some pics of the small space that accounted as his living quarters come workshop, his girlfriend never lived with him as there was no room for her as well so they lived separately.
Below I post two pics of the project AK started during lockdown 2020 and finished last June.
The gearing is Alfine 8 and the drive is a BBS01 with an external KT controller and lcd, folks may remember he like me had one of the early GSM's from Woosh but unfortunately he snapped the main drive axle on his one following a crash on his trike. With it mounted on the boom he had an off where he was sent flying over the front end due to having hot rodded the power with a little to much current.
On one of the forums abroad he has partly documented the build which I have been catching up on and has various pics of his process and the patience needed as he had little or no money due to lock down and no work.
The design is an Agilo I believe and is serial #001 as one buys the plans etc from the designer as a self build project.
Here the finished Velo sits on his 2nd floor veranda/balcony ready to be winched down to the ground. The forum sadly lost a very knowledgeable and clever contributor but obviously someone else has gained him.
Not bad at all weight wise a fully encompassed trike velo coming in at a remarkable 41kg.
Last edited: