Which torque arm for rear 350w yosepower ebay if possible

[it is i footpump]

Hi all i have 350w yosepower rear hub moter on my mtb , but will be fitting 17amp controller, and using a 48v battery .

as there will be more strain on the moter etc i think a torque arm will be needed please suggest a torque arm and how to fit. Thank you

 

[vfr400]

Show photos of both your drop-outs from the side.

 

[it is i footpump]

vfr400; hope these photos give enough info

 

[Nealh]

12 x 10mm, fit to brake side and use one of the existing mount holes to secure the end.
Torque Arm for e-bike Heavy-Duty 3mm Stainless Steel,12x10mm,electric bike ebike | eBay

You may get away with just using the shaped fitting for the axle and be able to mark up and drill a new hole to align with the rack support. A one piece is more secure then a two piece as there is no bolted connection to move.

 

[it is i footpump]

Thank you torque arm ordered. Can someone post a pic of fitted torque arm for my referance.

 

[it is i footpump]

Thank you torque arm ordered. Can someone post a pic of fitted torque arm for my referance.

 

[vfr400]

Can you show what you ordered? i recommend one like this, which is hardened steel. Many on Ebay are stamped out of non-hardened steel. They're easy to fit. Put it on the left side and fix the tie-bar to the lower caliper adapter screw. Use washers to fill the gap when it sits above the surface. You'll need a longer bolt for the caliper adapter.

Pardon our interruption...

 

[it is i footpump]

i ordered the ss one from the link above posted by nealh. Thank you