Wanted, BBS parts - LCD, harness, brake sensors

[Gully]

Hi guys,

I recently picked up a used Bafang BBS02 motor and a new 48V battery to go with it. So thought I'd ask on here before I buy all the other bits from China if anyone has anything they want to sell. I need an LCD - not too fussy which one, wiring harness, brake sensors (want to keep my original levers) and maybe a speed sensor (mine looks like it may be damaged). Maybe interested in reprogramming cable and opening tool too.

Anything out there? Cheers,

 

[Fordulike]

Grab yourself one of the fitting tools too, as the motor can shift about if not tightened to the bottom bracket super tight.

Here's a thread that was started, referencing stuff that is handy is have if you own a BBS mid drive:

https://www.pedelecs.co.uk/forum/threads/after-market-bbsxx-crank-drive-gear.32691/page-2#post-466624

 

[jarob10]

Grab yourself one of the fitting tools too, as the motor can shift about if not tightened to the bottom bracket super tight.

Here's a thread that was started, referencing stuff that is handy is have if you own a BBS mid drive:

https://www.pedelecs.co.uk/forum/threads/after-market-bbsxx-crank-drive-gear.32691/page-2#post-466624

Definitely- bb spanners not all created equally though. I have the greenbikekit spanner which works well

 

[PC2017]

Ooh I can't help sorry brake sensors are like rocking horse S in the uk - were did you get your new 48v battery from, case, cells and spec?

 

[Gully]

Thanks for advice guys. My battery is just 7.8Ah one that was going cheap. The cell spec. wasn't listed besides 'samsung'. The listing is here, though they're sold out now:

http://dillengerelectricbikes.co.uk/spares/electric-bike-kit-spares/bafang-8fun-batteries.html

Though not stated, a charger was included! Some people on here have suggested that it may be inadequate for my motor. I'm hoping it will be ok though, as I'm not looking for much range. Only want ~10 miles with moderate hills and speed. Any thoughts? Don't have funds for any better anyway ATM.


Would to hear from anyone who has upgraded LCD or something and wants to flog their old gear!

 

[PC2017]

I have a kit from dillenger, its 2+ year old now, the motor died twice i fixed it the first time but I have yet to find the time to attempt another fix, the batteries however are still going strong (36v) i have 2 stated samsung I believe they might be 29E but I haven't dare open the blue wrap to take a peek - I am looking to a german based battery company (enerprof) for my next build(48v), but doing a lot research on them before I buy they have not had much praise (although limited sales) on here.

Dillenger brake sensors are good but a bit pricey with P&P

I hope you find some1 with some spares!

 

[jarob10]

Thanks for advice guys. My battery is just 7.8Ah one that was going cheap. The cell spec. wasn't listed besides 'samsung'. The listing is here, though they're sold out now:

http://dillengerelectricbikes.co.uk/spares/electric-bike-kit-spares/bafang-8fun-batteries.html

Though not stated, a charger was included! Some people on here have suggested that it may be inadequate for my motor. I'm hoping it will be ok though, as I'm not looking for much range. Only want ~10 miles with moderate hills and speed. Any thoughts? Don't have funds for any better anyway ATM.


Would to hear from anyone who has upgraded LCD or something and wants to flog their old gear!

Have you tested yet by linking the pins?

 

[Gully]

Was your motor Bafang? To be clear, my motor isn't from Dillinger it's a used one from eBay. Glad to hear your battery hasn't let you down!

 

[Gully]

Have you tested yet by linking the pins?

Hi jarob. Sorry missed this at the time. Have tested now and no dice. Would really appreciate if you could check out the original thread and share any thoughts! Cheers

 

[Gully]

Going to put 3v over throttle pin in a minute