I am now running my torq 2 with an ecrazyman 36v 350 watt 25 amps controller,after trying out several known working wiring patterns i have arrived at phase wires green to green,yelo to blue,blue to yelo,and hall wires yelo to yelo,green-blue,blue-green,it is now running very smooth throttle responce is as before no load speed is as before with the ezee controller,but on the road speed is not matching the previous speeds i obtained at 36v,even at 48v it is reaching little more flat speed than with the ezee controller,could this mean 350 watts is under powered for the ezee motor or is 25 amps not enough,overall for a £28 including postage from china controller it does run very smooth and pretty much as before, much better than i expected considering the cost of an ezee replacement one at £125.