hi, very new to this but I've just bought an early thompson classic that someone has vandalised and cut all the wiring off almost everywhere. the controller is ok just the main wire from the control box to the lamp units been cut through. the lamp still has most of the wires still showing so i think i can work out what goes where. I've got a partial working diagram but if anyone has a better knowledge of what goes where i would much appreciate it. I've already had the motor apart and re wired that so i now have 7 wires coming through the shaft instead of cut of level with the end of the shaft. one pair of wires I'm struggling to work out where they may go is a twin red and black wire from the lamp unit that ends up at the controller area and has a white 4 wire plug I'm guessing it goes to the battery but as the battery is missing I'm reluctant to guess!
any help or photos appreciated
cheers
xr
any help or photos appreciated
cheers
xr