I need a new 36volt brushless motor controller for a Ziyou Ji Guang T18 electric bike
Can anyone help ?
Can anyone help ?
T18 electric bike
- Thread starter miki davis
- Start date
It will be an OEM only supplied item, if the bike seller /vendor can't help then you will have to opt to buying and swapping it third party controller and display such as a KT brand.
Thank you ….where do
I get that ? I bought the bike second hand and am struggling to find a stockist or manual
KT controller and display cna be bought on from various sellers and platforms, ebay, aliexpress, topbike kit, torque tech uk, etc , etc .
It is always best to buy the controller and display from the same vendor, some wire connectors will be different so you will have to solder on some new ones possibly or solder and shrink wrap wires directly.
As with a lot of cheap china bikes, getting hold of replacement electric parts are non exsistent (these parts are mass produced for the bike OEM industry and not the retail market) as they use parts from brands they we have never heard of or know. One can't buy these on the open market so one has to replace them with a good maker who can supply on the retail market.
It is always best to buy the controller and display from the same vendor, some wire connectors will be different so you will have to solder on some new ones possibly or solder and shrink wrap wires directly.
As with a lot of cheap china bikes, getting hold of replacement electric parts are non exsistent (these parts are mass produced for the bike OEM industry and not the retail market) as they use parts from brands they we have never heard of or know. One can't buy these on the open market so one has to replace them with a good maker who can supply on the retail market.
Thank you ….have took it off and photographed connections ….am left with this …..does anyone repair them ? Can’t find the exact one
