It's not worth the risk. Salt water is very corrosive to most parts of the bike. The worst thing is that it gets into crevices and dries out. The remaining crystals are hygroscopic. Whenever the air is damp, they absorb moisture and start their corrosion again. This can go on for years. IMHO, only a fool would use a bike of any sort on a wet beach.I'd love to ride by the sea if ever I got the chance. Could you give the bike a good spray all over of a water repellent before you headed out, would that help?
He was riding on the wet sand below the tide line, not the prom. If you'd seen the bikes that I had to repair after the owners did that once (suposedly), you wouldn’t be saying that. One more time: Don't take an electric bike onto the wet sand by the sea.It's only a bike-get a sense of proportion guys. If like me you love a ride along the prom just do it and get another bike if it gets too rusty. It really isn't such a big deal.
we know its only a bike, but can be pretty expensive being electricIt's only a bike-get a sense of proportion guys. If like me you love a ride along the prom just do it and get another bike if it gets too rusty. It really isn't such a big deal.
Exactly. As a young idiot (hmm, not sure 'young' was needed - it still applies), I wrecked my cassette by riding on sand. It's a wonderful gritty paste that comes out. Cassette seals are probably better now, but I wouldn't wish sand in anyone's bike / bearing.It's not worth the risk. Salt water is very corrosive to most parts of the bike. The worst thing is that it gets into crevices and dries out. The remaining crystals are hygroscopic. Whenever the air is damp, they absorb moisture and start their corrosion again. This can go on for years. IMHO, only a fool would use a bike of any sort on a wet beach.