Hi all , just bought a used swytch e bike kit, max battery, used fine for 2 days , was working fine until today I charged the battery and went to ride the bike and noticed the display was off , it's basic one , black , with red led bars on display,not sure what gen , I got it to come on again after removing battery a few times a pressing power button. but that took a few tries , but then after a few moments all the bars flash red for a quite a long moment then it switches off , the motor still works when it is off , but not sure what power setting and no display, it won't switch back on even though the motor runs when turn pedals, have to remove battery to try to switch back on but that doesn't always work , is intermittent , I can get it on and go through settings seems fine when in settings mode, but then when return to main display mode it just has all led flashing again and turns off , anyone with similar issue or smart enough can help ? thanks* edit found out from here is called , "base display" not sure if issue is with that or the controller, I found an lcd on ebay for £11 which seems a copy of the kt display everyone is talking about that works , but I just found , from here again, there are types of connections , m8 5 pin and m6 5 pin "julet" connection , they look the same I think the one I ordered is wrong so have cancelled it as may need a new controller , if so will need a new battery also :-/
Last edited:
