Seago folding bike display problem

[Cormac Mc Carthy]

Hi my name is Cormac and own a Seago electric bike. My Display Unit has stopped working properly. The switch for speed control is stuck in low. Water got below the case.

I have tried to get a replacement with no luck.

The control unit is a King model with 5 speeds and lights and walk function, The connector is a 5-pin male light green waterproof connector

The bike is 36v, with a 250w *fun motor and a Samsung 9ah battery

Is the any display unit out there that is a direct replacement or do I have to replace the control unit and some of the wiring.

Any thoughts


Thanks

 

[Nealh]

The display will have to be a Kingmeter or an Intelligent model may work, I assume the main controller is LSW Lishui brand. If you buy any other brand it will only switch on and show maybe a PAS level, it will though throw up a permanent error code due to comm's protocols not matching.
If unable to source a new display then one will have to buy a new controller and display combo.

Show us a pic of the display.

 

[Cormac Mc Carthy]

I have dismantled it and have attached some photos which might help to identify it.

 

[Nealh]

Lishui lcd display.
Electric Bicycle Accessories 36V DASHI C500 Display for our Lishui Controller|Electric Bicycle Accessories| - AliExpress

One may be better as I mentioned by replacing the controller and display with another like the KT brand.

 

[Cormac Mc Carthy]

Thanks for the info . I will try and source at KT controller and display

 

[Nealh]

That display is a generic design model but many brands use it with there own software, though many look the same or similar it would have to be controller brand compatible.

 

[Nealh]

Unfortunately most Kingmeter stuff is oem supplied only, the displays if found are quite expensive so it is in the long run better to replace the items.