rode the Gruber at Presteigne-Bought one!
As promised here are my thoughts on the Gruber, which was installed in an Electric Goat Bike, from Electricmountainbikes.com.
Steve had the bike suspended from his stand, with the motor running. The noise was less than I expected, and quieter than my steel geared Heinzmann, however it was still noticeable. While riding it and listening to others riding, the noise reduced considerably in an open space.
It took me a short while to work out how to get the best from it, especially as I have done many miles on a very powerful throttle controlled, Heinzmann powered bike and trike.
To configure the rpm for the pedal rotation, firstly ride the bike in whatever gear allows the rider to reach the desired cadence between 60 and 90 rpm, then press and hold the red button on the handlebars for two seconds. The cadence is now set and can be reset in the same way, at the desired rate.
Now ride the bike in a gear you are comfortable with and press the button.
If you are pedalling faster than the rate set, then there will be no motor sound or assistance. continue to pedal, and change up until you feel the push of the pedals. Let your legs press down on the pedals without effort.
To increase speed from this point, change up, to slow down, change down.{ on the rear cassette}, without changing the level of effort by the rider.
If you take your feet off at this point, the pedals will continue to turn, and the bike will power itself. Change into a low gear and it will even climb!
I rode this on the road/hill at the back of the show, and found that assistance was given in any gear so long as I didn't exceed the cadence set.
I watched several people ride this bike and all bar one was able to pick up the process within moments. Cycling, but with a lot less effort... but not a would be moped.
My wife was very impressed with it and had a second go the following morning at the rockbridge camp site. She rode easily on the wet grass and up and down the steep campsite driveway, all with much reduced effort.
So to the battery, Steve had the larger of the two battery options fitted.
It ran the bike suspended on the stand all day[no resistance on the pedals], then he rode it on the fancy dress parade [the scarecrow]. After that it was ridden up and down the test hill several times. Other riders trialled it at the show, and the battery still had charge left. Steve said that he had ridden it before the show in North Yorkshire by Dalby forest for almost five hours without flattening the battery.
Will we buy one? We are going to visit Steve at his home later this month, my wife will try it over a longer ride, but the thought is that we will have one fitted in her WSD Trek 6300.
Here is a very breif clip of my wife on the bike...
YouTube - Gruber assisted witch
Nigel
As promised here are my thoughts on the Gruber, which was installed in an Electric Goat Bike, from Electricmountainbikes.com.
Steve had the bike suspended from his stand, with the motor running. The noise was less than I expected, and quieter than my steel geared Heinzmann, however it was still noticeable. While riding it and listening to others riding, the noise reduced considerably in an open space.
It took me a short while to work out how to get the best from it, especially as I have done many miles on a very powerful throttle controlled, Heinzmann powered bike and trike.
To configure the rpm for the pedal rotation, firstly ride the bike in whatever gear allows the rider to reach the desired cadence between 60 and 90 rpm, then press and hold the red button on the handlebars for two seconds. The cadence is now set and can be reset in the same way, at the desired rate.
Now ride the bike in a gear you are comfortable with and press the button.
If you are pedalling faster than the rate set, then there will be no motor sound or assistance. continue to pedal, and change up until you feel the push of the pedals. Let your legs press down on the pedals without effort.
To increase speed from this point, change up, to slow down, change down.{ on the rear cassette}, without changing the level of effort by the rider.
If you take your feet off at this point, the pedals will continue to turn, and the bike will power itself. Change into a low gear and it will even climb!
I rode this on the road/hill at the back of the show, and found that assistance was given in any gear so long as I didn't exceed the cadence set.
I watched several people ride this bike and all bar one was able to pick up the process within moments. Cycling, but with a lot less effort... but not a would be moped.
My wife was very impressed with it and had a second go the following morning at the rockbridge camp site. She rode easily on the wet grass and up and down the steep campsite driveway, all with much reduced effort.
So to the battery, Steve had the larger of the two battery options fitted.
It ran the bike suspended on the stand all day[no resistance on the pedals], then he rode it on the fancy dress parade [the scarecrow]. After that it was ridden up and down the test hill several times. Other riders trialled it at the show, and the battery still had charge left. Steve said that he had ridden it before the show in North Yorkshire by Dalby forest for almost five hours without flattening the battery.
Will we buy one? We are going to visit Steve at his home later this month, my wife will try it over a longer ride, but the thought is that we will have one fitted in her WSD Trek 6300.
Here is a very breif clip of my wife on the bike...
YouTube - Gruber assisted witch
Nigel
Last edited: