RIGHT side pas for KTController?

[Robertstandem]

I need a right side pas for my Ultegra chainset
I glued the magnet to the inside of the chainset ok but the sensor does not work with the KT controller.
It DOES work with a non-KT controller and it does work with a left side pas.…
So…it looks like KT controllers need a specific type of right side pas.
Can anyone point me in the direction of a right side pas that will work with KT controllers Please?

 

[Bikes4two]

I successfully fitted a 12 magnet PAS Kingmeter sensor to my Campag Power Torque BB (similar size to Hollowtech 2) and it works perfectly with my KT controller (C1 = 7)

I can't remember where I got the sensor from but his ebay link HERE shows a similar one. The magnetic disc is sized to fit on a 22-24T chainring - for my setup I needed to 3D print an adapter plate in order to attach the magnetic disk to my 34T inner chainring (see post HERE)

 

[thelarkbox]

Fwiw I also fitted a a sensor of the same design as @Bikes4two, The Pas feature was Not enabled with my KT controller out of the box and required enabling with a different setting in addition to that which identifies the sensor used.

 

[saneagle]

I need a right side pas for my Ultegra chainset
I glued the magnet to the inside of the chainset ok but the sensor does not work with the KT controller.
It DOES work with a non-KT controller and it does work with a left side pas.…
So…it looks like KT controllers need a specific type of right side pas.
Can anyone point me in the direction of a right side pas that will work with KT controllers Please?

Download the lcd manual and do the settings.

 

[Nealh]

I need a right side pas for my Ultegra chainset
I glued the magnet to the inside of the chainset ok but the sensor does not work with the KT controller.
It DOES work with a non-KT controller and it does work with a left side pas.…
So…it looks like KT controllers need a specific type of right side pas.
Can anyone point me in the direction of a right side pas that will work with KT controllers Please?

Most RS PAS will work with a KT .
One has to configure C1 correctly and also try reverse pedal in case the magnet disc needs reversing.

The one thing one hasn't said is which PAS one has actually bought.

 

[Robertstandem]

Thanks guys, didn’t think about the settings.

 

[Bikes4two]

Thanks guys, didn’t think about the settings.

Worry not - that's what the forum is here for (to help out).

Your username sugests you might have a Roberts Tandem - lovely machines that they are. Are you converting it to electric BTW (and what with)?

 

[Robertstandem]

Our Robert’s tandem has a Cytronics system. The KT system is for a solo. I tried the C1 setting and it worked. Many thanks.
Chris