Raleigh fork 100mm?

[Keithdrengen]

Maybe you know this bike, popular in Dänemark:

Raleigh 2010

Can a 100mm (Tongxin -)hub fit in the front fork? Or is it a special sized fork?

Thanks

Carsten J

 

[jerrysimon]

Should do. You may have to use some washers as spacers on one or both sides depending on the fork arm profiles.

Often they drop right in if only after you scrape away/file the pain off the fork end lug for the motor shaft (square edged) to slip into.

Regards

Jerry

 

[dan]

Should do. You may have to use some washers as spacers on one or both sides depending on the fork arm profiles.

Often they drop right in if only after you scrape away/file the pain off the fork end lug for the motor shaft (square edged) to slip into.

Regards

Jerry

you will also need some kind of torque arm to stop the motor spinning in the drop outs

 

[inno-cycle]

Excuse my ignorance - do you need a front brake in Belgium?