Help! Quick release cables

[maviler]

Good morning all

I have installed the yose power front wheel conversion kit, absolutely love it.
What I am trying to is to try and have the battery and controller in a waterproof bag mounted on the handle bar with a quick disconnect, Like the swytch bike.
Can anyone recommnd any cable connectors that might serve the purpose.

Thanks in advance.

 

[Woosh]

the Swytch kit has fewer connections compared to a common kit because it has the 5-pin LCD on the removeable case. You would need 9 wires for the motor plus 3 wires for the pedal sensor. The Swytch can reduce that number to 11 by sharing the 5V and GND between the wheel and pedal sensor.
In your case, it would be more sensible to keep the installation like it is and put only the battery in the removable bag. You'll need a pair of Anderson 20A connectors, something like this:

5/10/20/50/100 Electrical Connectors 30A 30AMP 600V Terminal+Interlock Plug | eBay

Self securing design holds the connectors together but allows for quick disconnect. Electrical Connector Set. 20 Pair Electrical Connector. 10 Pair Electrical Connector. 50 Pair Electrical Connector.

www.ebay.co.uk