My e-bike is:
https://kross.eu/en/bikes/ebike/ebike-mtb/hexagon-boost-1-0-black-graphite-red-matte
Bought in Norway through an online bike-shop.
My battery is Phylion SF-06 396WH (can googles with Joycube JCEB360-11.6 too).
My problem:
After 4000 km of the original run, the last days, the battery in the holder began to hold a bit bad and the contact was so bad that the whole system turned off at small bumps on the road.
Arriving home, I bent the battery contacts into the center, everything worked perfectly. Next, I decided to clean the connection (see pic. 1) socket itself with the contacts where the battery was inserted, with a metal brush (who knew that the controller had power after removing the battery?). And I heard the sound of a short circuit and a spark when I touched a couple of contacts (see pic. 2) with a brush. After that, the bike did not give life and no longer turns on (display not seems to show anything). I'll have to walk to school. It's sad to admit, but the bike's name and details very bad to google.
I think the controller is gone.
I tried to disassemble, but there was everything inside the controller in rubber glue and I hammered everything back. Battery is OK.
Manual for battery and holder kit: https://kiube.se/wp-content/uploads/2018/03/Phylion36V11-6AhSF-06SmartBMSSpecification.pdf
Question:
Please help me find a new controller box with support kit (see pic. 3). It looks so complicated, I want to go and bury myself. Thank you so much.
![CuHbLMmxdaE[1].jpg](/forum/data/attachments/39/39910-01362c6fe392ec9000f591a69377e55f.jpg)
https://kross.eu/en/bikes/ebike/ebike-mtb/hexagon-boost-1-0-black-graphite-red-matte
Bought in Norway through an online bike-shop.
My battery is Phylion SF-06 396WH (can googles with Joycube JCEB360-11.6 too).
My problem:
After 4000 km of the original run, the last days, the battery in the holder began to hold a bit bad and the contact was so bad that the whole system turned off at small bumps on the road.
Arriving home, I bent the battery contacts into the center, everything worked perfectly. Next, I decided to clean the connection (see pic. 1) socket itself with the contacts where the battery was inserted, with a metal brush (who knew that the controller had power after removing the battery?). And I heard the sound of a short circuit and a spark when I touched a couple of contacts (see pic. 2) with a brush. After that, the bike did not give life and no longer turns on (display not seems to show anything). I'll have to walk to school. It's sad to admit, but the bike's name and details very bad to google.
I think the controller is gone.
I tried to disassemble, but there was everything inside the controller in rubber glue and I hammered everything back. Battery is OK.
Manual for battery and holder kit: https://kiube.se/wp-content/uploads/2018/03/Phylion36V11-6AhSF-06SmartBMSSpecification.pdf
Question:
Please help me find a new controller box with support kit (see pic. 3). It looks so complicated, I want to go and bury myself. Thank you so much.