Following on from my earlier posts in the general discussion area of the forum, I came across this Technical area. Apologies if I was posting my questions in the wrong place, the replies have been very helpful but thought it might be better to carry on in this section.
I have a BatriBike Breeze with a dodgy battery and am wondering about a DIY battery build / re-build. The original battery has 10 LiPo pouch cells, so I'm assuming that the BMS is designed for those cells. The battery case is metal so the pouch cells are well protected.
To be honest, I'd like to keep costs to a minimum, that's why I'm thinking about replacing the pouches, or perhaps getting a 36V 10AH pack that will fit into the old case.
Suggestions and places to buy recommendations welcome!
Thanks
I have a BatriBike Breeze with a dodgy battery and am wondering about a DIY battery build / re-build. The original battery has 10 LiPo pouch cells, so I'm assuming that the BMS is designed for those cells. The battery case is metal so the pouch cells are well protected.
To be honest, I'd like to keep costs to a minimum, that's why I'm thinking about replacing the pouches, or perhaps getting a 36V 10AH pack that will fit into the old case.
Suggestions and places to buy recommendations welcome!
Thanks