i have two objectives,
1) to derestrict my ebike
2) to install a throttle
ive attached a picture of the wires found within the controller of my e bike. There are two white plugs shown in the picture, one of which is attached to the red, yellow, black and green wires - this leads to the torque sensor found on the other side of the chain ring. The other white plug is attached to the red, white and black wire which leads to the lcd screen on my bike. im not sure if detaching one of the white plugs will de limit the speed - i highly doubt it
does anyone have any suggestions based on the pic ive provided and the description ive given as to any solutions that can derestrict this e bike? another thought im having is thinking if its possible to add a throttle by detaching the white plug for the torque sensor? that toque sensor picks up motion from the pedals and sends information back to the controller to provide the bike with power, instead a throttle may be able to replace this?
id be grateful for any help
1) to derestrict my ebike
2) to install a throttle
ive attached a picture of the wires found within the controller of my e bike. There are two white plugs shown in the picture, one of which is attached to the red, yellow, black and green wires - this leads to the torque sensor found on the other side of the chain ring. The other white plug is attached to the red, white and black wire which leads to the lcd screen on my bike. im not sure if detaching one of the white plugs will de limit the speed - i highly doubt it
does anyone have any suggestions based on the pic ive provided and the description ive given as to any solutions that can derestrict this e bike? another thought im having is thinking if its possible to add a throttle by detaching the white plug for the torque sensor? that toque sensor picks up motion from the pedals and sends information back to the controller to provide the bike with power, instead a throttle may be able to replace this?
id be grateful for any help
Attachments
-
2.4 MB Views: 21