help with brakes

[garysnooker]

ive just bought a Tektro Auriga Comp Front Hydraulic Brake what lead do i need to connect to a kt controller

 

[Az.]

ive just bought a Tektro Auriga Comp Front Hydraulic Brake what lead do i need to connect to a kt controller

What do you mean by lead? Brake sensor?

 

[garysnooker]

yes sorry lead Brake sensor

 

[saneagle]

Does it already have a brake sensor in it? If so, how many pins in the connector?

 

[Nealh]

KT uses three pin sensors, though one can use two pin and simply omit the red/5v.

If the brake lever doesn't have an integrated brake sensor then show us a pic of the lever for sensor placement.

 

[garysnooker]

thanks for your help on this

 

[Nealh]

Chop both brake and controller connector off and just solder two wires together , omit the 5v red and heat shrink/insulate the end.
Or if one must have a connector buy a julet or higo tail ( which ever connector you have) and chop off the controller connector , solder the tail to the connector wires and omit the 5v red and insulate.

 

[saneagle]

thanks for your help on this

You're being very sparse with your information, so all we can do is ask more questions. Which version of the controller do you have - block connectors or waterproof ones? Does your controller have two or three wires in the brake connectors, or does it have both?

 

[Nealh]

Thirdly if one doesn't want to chop connectors , buy a 2 pin & 3 pin tail and solder them together to fit in between existing connectors.

 

[garysnooker]

im up for solder wires together but if there is a lead that i can buy that fits both ends would be good my controller https://www.ebay.co.uk/itm/283513202378

 

[garysnooker]

Thirdly if one doesn't want to chop connectors , buy a 2 pin & 3 pin tail and solder them together to fit in between existing connectors.

3 Core PVElectric Bike Extension Cable Throttle Brake Sensor For Electric Bikes | eBay

Feature: 1. 36.5cm and Applicable: The total length of the cable is 36.5cm, which is used to connect the accelerator and brake handle. It is applicable to most electric bicycles, electric motorcycles, electric scooters, etc.

www.ebay.co.uk

thanks do think this one would work

 

[Nealh]

One can't buy 2 pin julet to 3pin jst leads , one has to buy the tails and solder them up or simply solder wires together directly.

 

[garysnooker]

do you think this one would work thanks

2 Pin Female Electric Bike Extension Cable For Light Waterproof Electric | eBay

Feature: 1. Applications: Electric bike extension cable with waterproof connector is used to connect the light for most electric bikes, electric motorcycles and electric scooters. Copper and PVC: Electric bike light female extension cable is made of copper and PVC, with a mixed structure, strong...

www.ebay.co.uk

 

[Nealh]

It is a julet 2 pin waterproof connector so will fit your brake connector.
Wire the tails to the Gnd /black and the Signal /yellow wires on the KT brake cable .

With the KT one doesn't need the brake cut out if not using a throttle .
If not running a throtle KT has no run on, so brake sensors aren't needed .

 

[garysnooker]

It is a julet 2 pin waterproof connector so will fit your brake connector.
Wire the tails to the Gnd /black and the Signal /yellow wires on the KT brake cable .

With the KT one doesn't need the brake cut out if not using a throttle .
If not running a throtle KT has no run on, so brake sensors aren't needed .

sorry what is tails i do have a throttle on the bike ive just ordered this 2 pin https://www.ebay.co.uk/itm/235684743612

 

[thelarkbox]

Be careful to 1) line up the plug/socket correctly, and 2 push all the way home.. afaik the 'waterproof' connector option for ebike controller/peripherals is a real pita if/when any fault finding/fixing is involved, and the tiny pins are Very fragile.. (It seemed like a good idea/option when kit shopping.. it wasn't.. )

fwiw 'tails' above relates to the wire ends of a ebay socket cable..

 

[Nealh]

A julet is a moulded w/p connector with wire tails.