Help what this cable pulled out snapped off please do

[Djusername]

Speedo throttle miles etc all work traced cable back frame goes into it hope not to do charging there one rack v brake it right come off near throttle hope it minor and in central London at moment cheap Chinese plastic lol cable goes- in back past fold that wherever charger socket is but one go in rack brake. Not/noticed nothing not working hmm, I worried though Thanks

 

[Djusername]

Been looking online is this just safety cut off wire and long one works it ok only use front brake anyway really that back one really loose, thanks

 

[thirteen]

Looks like a brake sensor to me.

 

[Djusername]

Looks like a brake sensor to me.

Yes what I thought looking pics online and not essential it snapped off easy lol

 

[Nealh]

The bike has two brake cut offs so no need to worry, the broken one you need to cap the end so no moisture can get in and cause electrical issues in the controller. Be careful to insulate each wire end separately otherwise a short will occur and cause issues.
As you have a throttle it is advantageous to have one cut off in operation as a means to cut power in case of a throttle issue also helps if the a PAS has over ride.

 

[Djusername]

The bike has teo brake cut offs so no need to worry, the broken one you need to cap the end so no moisture can get in and cause electrical issues in the controller. Be careful to insulate each wire end separately otherwise a short will occur and cause issues.
As you have a throttle it is advantageous to have one cut off in operation as a means to cut power in case of a throttle issue also helps if the a PAS has over ride.

Thanks reply oops they might touched while on and put through sleeve but did twist em and put to side while off. Glad it not that bad anyway, cheers only done 175 miles want least 1000 out bike. Bike no gears so but least front one ok still.