Help identifying a motor clutch

[Cobblers66]

As above, I have this motor here and the one way bearing is slipping. I've looked across Ali express and cannot find a new one. This has 31 tooth nylon gears and the measurements are in the photos

Has anyone come across one of these before?

 

[Scorpio]

Hi, if you can't find a replacement you might be able to get yours working. My bike had been unused for many years and the clutch was locked solid, I stripped the clutch and the 3 locking "barrels" were rusted when they should be free to move.
For yours, maybe try squirting a degreaser in your hub to free the barrels, then soak it in oil / grease to prevent future problems.
If it works, great. If not it has cost you nothing apart from some time. Hope it helps.

See post #6 for details of my clutch internals https://www.pedelecs.co.uk/forum/threads/kemp-starley-dutch-town-bike-out-of-hibernation.37181/

 

[Cobblers66]

Thanks for the suggestions but degreaser didn't seem to help there is play in the mechanism and when it wobbles it slips. I'm going to keep trying to find a replacement

I think its a shengy motor, would contacting them directly be possible?

 

[vfr400]

Thanks for the suggestions but degreaser didn't seem to help there is play in the mechanism and when it wobbles it slips. I'm going to keep trying to find a replacement

I think its a shengy motor, would contacting them directly be possible?

Sheng yi

 

[davell]

@Cobblers66 did you get this sorted? I think my clutch which looks to be the same as yours (Sheng yi motor) may be developing the same issue.