Fiido m21 battery wobble

[Simonwwfc]

Anyone else has issues with battery wobble inside frame every tiny bump it rattles about

 

[cyclebuddy]

You just need to add a bit of foam to the battery; sometimes just a lick or two of gaffer tape will be enough to pack it more tightly.

How are you finding your M21 with torque sensor?

 

[Simonwwfc]

You just need to add a bit of foam to the battery; sometimes just a lick or two of gaffer tape will be enough to pack it more tightly.

How are you finding your M21 with torque sensor?

I have only had it since Tuesday been out wed for hour or so I’ve upgraded the rear shock to 150mm 1000lb one , changed the pedals for some better mtb ones , standard cable disc brakes il change over time il be going out for good few hours today . Yes it’s a well built bike for the money rides nice . I’ve unlocked the new controller so makes a bit of diff to throttle shame the pas still only stays to 25 kmp also would have been nice to show mph on controller

 

[cyclebuddy]

The old display wasn't great (difficult to see in bright light), but at least you could fudge showing MPH/Miles by changing wheel size.

The new display is worse in that the display only shows to 25kph even if the bike is going faster (downhill for example).

Rumour is there'll be a new display from April/May time.

 

[Simonwwfc]

The old display wasn't great (difficult to see in bright light), but at least you could fudge showing MPH/Miles by changing wheel size.

The new display is worse in that the display only shows to 25kph even if the bike is going faster (downhill for example).

Rumour is there'll be a new display from April/May time.

You can unlock the new display I’ve got fitted so it does show correct speed mine goes over 50kph

 

[cyclebuddy]

Yes, sorry, it does on the torque M21, but not on the torque D21, which uses the same LED display. Either way, it's rumoured they're changing it again soon. Lot of complaints about visibility in sunlight, lack of odometer, and the KPH only; hopefully they'll sort those issues... maybe even change to LCD?

 

[Simonwwfc]

Let’s hope so I’ve sorted batt out now added foam at one end as batt must be a lot smaller that length inside frame and also wrapped gaffer tape in three different positions on battery to make it a tight snug fit much much better