Hi,
I've fixed my problem but I haven't found any posts in connection with this problem. I wanted to help Fiido owners who face similar problems.
Error description:
-Brand new bike
-works fine in pure electric mode (when you pull the throttle)
-If I start turning the pedal it won’t help it with the electric drive.
-You can facing with many malfunction from the same reason
Solution
Unfold your bike
Remove the four screws around the high current connector (not on the accumulator side)next to the hinge.
Observe the pins in the connectors (very precisely)
I had one pin(with a wire) falling out from a connector.
After push it back with a small flat screwdriver the problem was fixed.
I hope it helped.
I've fixed my problem but I haven't found any posts in connection with this problem. I wanted to help Fiido owners who face similar problems.
Error description:
-Brand new bike
-works fine in pure electric mode (when you pull the throttle)
-If I start turning the pedal it won’t help it with the electric drive.
-You can facing with many malfunction from the same reason
Solution
Unfold your bike
Remove the four screws around the high current connector (not on the accumulator side)next to the hinge.
Observe the pins in the connectors (very precisely)
I had one pin(with a wire) falling out from a connector.
After push it back with a small flat screwdriver the problem was fixed.
I hope it helped.