EBCO UCL30 : spacer issue.

[Guy]

Hi all, I`m after some advice/help please.

On replacing the rear tyre on my wifes EBCO UCL:30 I noticed that the bearings were rough so thought no problem I`ll clean and re-grease. All went well until it came to reassembly as I stupidly didn`t make notes on the spacer/washer/cone nut sequence on the non gear set side (l/h as sat on bike). I have ended up with cone/spacer/washer and locking nut which all seems to work with nothing catching on the protective rubber boot but I`m not 100% happy.

Any help will be much appreciated, I`ll remember not to rush/assume it`ll be obvious next time !!

Thanks, Guy.

 

[vfr400]

 

[Guy]

Many thanks for the reply VFR400 or even NC30..!! Any absolute gem of a bike, its big brother being my dream machine. However my RD350YPVS N2 will suffice until a lottery win...

Got my wifes EBCO back together and all seems fine thanks, the diagrams you posted matched what I ended up with after much trial and error.

Thanks again, Guy.